Trailer Chassis
Original price was: 360,00 €.250,00 €Current price is: 250,00 €.
Underride guard semitrailer
39,99 €
Truck motor Poison
12,99 €
incl. 19% VAT plus Shipping
Truck motor Poison, truck motor, powerful 7,2 Volt, 6.500 U/min, shielded, with cable and plug
Item code 906023
In stock
Description
Truck motor Poison, truck motor, powerful 7,2 Volt, 6.500 U/min, shielded, with cable and plug, suitable for all Tamiya trucks and other vehicles, measure: Diameter 36mm, length of all 68mm, motor shaft 3,17x10mm, diameter collar 13mm, weight ca. 180g.
Additional information
| Weight | 0,1 kg |
|---|---|
| Lieferzeit |
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
You may also like…
3-speed gearbox with transfer case
incl. 19% VAT
plus Shipping
3-speed gearbox with transfer case, for all-wheel drive, gearbox housing made of aluminum, hardened steel gears, 8-way ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11.32: 1, 3rd gear 5.66: 1. Dim. without motor 80mm, width 46.6mm, height 64mm, The output shafts have a diameter of 5mm.
The front axle can be switched on with a servo. The gears are switched by a second servo. The gearbox is mounted, the max. input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the transmission housing. The frame width should be between 60-63mm.
Contents: 1 manual gearbox with distributor, fixing screws, linkages
Item code: 251105
3-speed gearbox
incl. 19% VAT
plus Shipping
3-speed gearbox, gearbox housing made of aluminum, hardened gears made of steel, 6 ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11,32: 1 , 3nd gear 5.66: 1. Dim. Length without motor 65mm, width 46,6mm, height 39,4mm, shaft exit 5mm diameter
The gearbox is mounted, the motor and the matching flange are attached from the outside via two terminals on the gearbox, is switched by a servo, the max. Input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the gear housing. The frame width should be between 60-63mm
Contents: 1 manual transmission, fixing screws, ball heads
Item code: 251100
Related products
Drive set for the Büssing 8000 S 13
incl. 19% VAT
plus Shipping
Drive set for the Büssing 8000 S 13, consisting of a 7.2 volt underfloor motor with planetary gearbox from the company Servonaut, the motor is pre-disturbed , has an idle speed of 470 rpm, the rated speed is 390 rpm, rated torque: 34.6 Ncm, the matching motor holder made of aluminum and the cardan shaft made of stainless steel with appropriate length compensation, mounting hardware and installation instructions. Contents: 1 gear motor, 1 motor holder, 1 cardan shaft, installation instructions
Caution. Not suitable for children under 14 years.
item code: 251001
3-speed gearbox with transfer case and self-locking differential
incl. 19% VAT
plus Shipping
3-speed gearbox with transfer case, permanent four-wheel drive, self-locking differential to compensate for the speed differences in the drive train, gear housing made of aluminum, hardened gears made of steel, 10-times ball bearing, suitable for the scale 1:16 - 1:10, reductions: 1st gear 22.65: 1, 2nd gear 11.32: 1, 3rd gear 5.66: 1. Dim. Length without motor 80mm, width 46.6mm, height 64mm, The output shafts have a diameter of 5mm.
The gears are switched by a servo. The gearbox is mounted, the max. Input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the transmission housing. The frame width should be between 60-63mm.
Contents: 1 manual gearbox with distributor, fixing screws, linkages
item code: 251106
Warning! Not suitable for children under 14 years.
Dunker motor 12 Volt
incl. 19% VAT
plus Shipping
Dunker motor 12 Volt, Nennspg. 12 Volt, agitator speed from the engine idle 3600 U/min, current at the engine idle 0,6 A, speed rating 3100 U/min, Leistung 44,5 W, rating current 5,2 A, starting torque 82 Ncm, rated torque 13,7 Ncm, power efficiency 71%, weightt 1200g, suitable with the 2-speed control gear box with item code 242424
Item code: 221259
2-speed control gear box
incl. 19% VAT
plus Shipping
2-speed control gear box, suitable for the Dunker motor with item code: 221259, ball bearing triple, speed-reduction 1.gear 2:1 , 2.gear 1:1 , switching during the driving it`s posible with a servo, housing from aluminum, driving shaft SW5, shaft and pinion`s are hardened, initial speed max. 6000 U/min, control rod and fixing part`s are included, for fixed it with an other motor you need the adaptor with item code: 220324
Item code: 242424
Reviews
There are no reviews yet.