Click to enlarge
Windshield wiper - set 5,40 €
Back to products
Warnbalken mit Elektronik
Beacon Light bar Set Volvo FH16 tow truck 145,00 €

Trailer axle with lift kit + 8mm

82,99 €

incl. 19% VAT plus Shipping

Trailer axle with lift kit + 8mm, scale 1/14, the new generation of CARSON trailer axles with dummy air springs and lift kit. Bumps are cushioned even better by the new, softer rubber bellows and offer a driving pattern that is absolutely true to the original. The two suspensions included (standard & with raised height + 8mm) offer you the option of adapting your trailer to your higher (+ 8mm) tractor from the saddle level. Content: Trailer axle with lift kit, attachments, assembly instructions

Item No. 907643

Caution! Not suitable for children under 14 years of age.

In stock

Add to compare
Add to wishlist
SKU: 907643 Categories: ,
Description

Trailer axle with lift kit + 8mm, scale 1/14, the new generation of CARSON trailer axles with dummy air springs and lift kit. Bumps are cushioned even better by the new, softer rubber bellows and offer a driving pattern that is absolutely true to the original. The two suspensions included (standard & with raised height + 8mm) offer you the option of adapting your trailer to your higher (+ 8mm) tractor from the saddle level. Content: Trailer axle with lift kit, attachments, assembly instructions

Caution! Not suitable for children under 14 years of age.

Product safety

Product safety

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Trailer axle with lift kit + 8mm”
Shipping & Delivery

You may also like…

Add to compare

Semitrailer rim aluminum long hole

63,99 €

incl. 19% VAT

plus Shipping

Semitrailer rim aluminum long hole, scale 1/14, cover cap SAF plastic, with seat for ball bearing, suitable for all Carson semitrailer  with decoration screw´s, Quantity: 2 pieces Item code : 907350
Add to wishlist
Add to cart
Quick view
Add to compare

Semitrailer rim aluminum round hole

67,99 €

incl. 19% VAT

plus Shipping

Semitrailer rim aluminum round hole, scale 1/14, cover cap aluminum, with 2 seat´s for ball bearing, suitable for all Carson semitrailer, with decoration screw´s, Quantity: 2 rim, 2 cap, 20 screw's Item code : 907040
Add to wishlist
Add to cart
Quick view
Add to compare

Semitrailer rim gray, wit seat for ball bearing

17,49 €

incl. 19% VAT

plus Shipping

Semitrailer rim, scale 1/14, gray plastic, cover cap SAF black, with seat for ball bearing diameter 49mm, width 27,5mm, suitable for wide base tyre with item code: 907012 (tyres are not included at this shipment), Quantity: 2 pieces Item code : 907154
Add to wishlist
Add to cart
Quick view
Add to compare

Wide base tyre Fulda Multitonn 2

26,49 €

incl. 19% VAT

plus Shipping

Wide base tyre Fulda Multitonn 2, scale 1/14, diameter outside 83 mm, diameter inside 44 mm, width 27 mm, tube-chamber tire, with inscription, Quantity: 2 pieces Item code : 907012
Add to wishlist
Add to cart
Quick view
Add to compare

Semi trailer rim chromed with seat for ball bearing

26,49 €

incl. 19% VAT

plus Shipping

Semi trailer rim chromed, scale 1/14, plastic, cover cap black, with seat for ball bearing diameter 49mm, width 27,5mm, suitable for wide base tyre with item code: 907012, Quantity: 2 rims, 2 cap  (tyres are not included at this shipment) Item code : 907055
Add to wishlist
Add to cart
Quick view

    Related products

    Add to compare

    Plast. Parts Trailersus. w/8mm lift

    29,99 €

    incl. 19% VAT

    plus Shipping

    Plast. Parts Trailersus. w/8mm lift, scale 1/14, made of plastic, for converting the existing air suspension axle, suitable for all Carson trailers up to 09/21 (except for all low-loaders), optionally with 8mm lift, the new plastic parts and the air bellows allow a higher spring travel and a larger twisting of the axle, one set is required for each trailer axle, the metal parts and the assembly material are taken over from the existing axle, Content: 1 set of standard swing arms, 1 set of swing arms with + 8mm lift, 1 set of brackets, 2 air bellows
    item code: 907644
    Caution! Not suitable for children under 14 years of age.
    Add to wishlist
    Add to cart
    Quick view
    Add to compare

    Towing bar Low loader TU4

    26,99 €

    incl. 19% VAT

    plus Shipping

    Towing bar Low loader TU4, scale 1/14, made of reinforced plastic, one-piece, for self-construction or as a spare part suitable for the Goldhofer TU4 low-loader trailer Art.No. 907400, dimensions: length 120mm, width 75mm, height 25mm, content: 1 drawbar Attention! Not suitable for children under 14 years. item code: 907627
    Add to wishlist
    Add to cart
    Quick view
    Sold out
    Add to compare

    Ramp set Low loader GH TU4

    200,00 €

    incl. 19% VAT

    plus Shipping

    Ramp set Low loader GH TU4, scale 1/14, one-piece ramps with wooden application for self-construction or as a spare part suitable for 907400 Goldhofer TU4 low loader trailer 4-axle, all parts required for assembly are included in the scope of delivery, contents: 2 ramps, mounting hardware, wooden support, assembly instructions Attention! Not suitable for children under 14 years. item code: 907628
    Add to wishlist
    Read more
    Quick view
    Add to compare

    Volvo FH16 headlight insert with daytime running lights

    110,00 €

    incl. 19% VAT

    plus Shipping

    Volvo FH16 headlight insert with daytime running lights, scale 1/14, suitable for Tamiya FH16, from 7.2 to 14 volts, reflector with circuit board and daytime running lights "V", light functions: daytime running lights (burns with 100% brightness), low beam (brightness of daytime running lights reduced automatically to 25%), turn signals l + r, fog lights, high beam, cornering lights, cover caps, cable length approx. 25 cm, fastening material, installation instructions, content: 1 set of reflector with circuit board l + r, 1 set of cover caps, fastening material Warning: Not suitable for the MFC from Tamiya Attention! Not suitable for children under 14 years. item code: 907507
    Add to wishlist
    Add to cart
    Quick view
    Add to compare

    1/14 driven front axle with self-locking differential

    235,00 €

    incl. 19% VAT

    plus Shipping

    1/14 driven front axle with self-locking differential The CARSON drive concept for TAMIYA® Trucks in 1:14 scale. Equip your TAMIYA 2- or 3-axis TAMIYA tractor to the all-wheel all-wheel drive with our self-locking axles. The components can be easily replaced, as these are installed at the existing mounting points. A great advantage of these axles is that no further space is required for a shift servo (linkages and bowden cables), since this automatically locks automatically / automatically in case of a traction loss. Officially licensed by ZF Friedrichshafen AG. The axle is equipped with a self-locking differential and can be built either with or without throughput, both shafts and housing covers are included. With a traction loss, the differential locks automatically / automatically and generates 100% traction. A major advantage of this drive axle is that NO shifter servos, Bowden cables and linkages are required for the differential locks, which also benefits the clarity and space offer in the chassis. The axle components are housed in a high-load-bearing reinforced plastic axle housing and are ideally suited for every construction site application. • The front axle is modeled in detail • Reinforced plastic axle housing • CNC machined aluminum stub / steering lever • High ground clearance thanks to a "slim" differential housing (height 33 mm) • 16-way ball bearing • Self-locking differential (shifter servo, linkages and Bowden cables are not required) • Hardened steel bevel gears • Axis ratio 1: 2.66 • Maximum steering angle 42 ° • 5 mm transmission / input shaft • Aluminum rim driver 12 mm hexagonal • Simple conversion to the axis with and without through-feed (both shafts and housing covers are included in the kit) • Dimensions front axle LxBxH: 44 x 160 x 33 mm • Weight approx. 175 g • Matching aluminum rims (front driven) Art.-No. 907272 10-hole design narrow design and 907278 10-hole design wide design 12 (mm hex wrench) • Incl. Tie rod • The mounting kit (907280) is required to mount the front axle item code 907267
    Add to wishlist
    Add to cart
    Quick view
    Add to compare

    Flat bed axle with bellow dummys

    76,99 €

    incl. 19% VAT

    plus Shipping

    Flat bed axle with bellow dummys, scale 1/14, kit from boosted fiber glass-plastik,axle shaft from metal, track width with tires 190mm, to need a width of frame from 76mm, diameter of the wheel axle 5mm, shipment from the kit include are 1 axle with fixing parts and construction manual Item code : 907140
    Add to wishlist
    Add to cart
    Quick view
    Add to compare

    Steering rod

    8,49 €

    incl. 19% VAT

    plus Shipping

    Steering rod, scale 1/14, curved from steel, with this tie rod the steering works better, suitable for all Tamiya euro-trucks, Quantity : 1 steering rod and construction manual item code : 13516
    Add to wishlist
    Add to cart
    Quick view
    Add to compare

    Flat bed axle with flat springs

    59,99 €

    incl. 19% VAT

    plus Shipping

    Flat bed axle with flat spings, scale 1/14, axle shaft from steel, diameter of the axle 6mm, axle bolt 5mm, total width ca. 176mm, length of the flat springs ca.70mm, distance from middle to middle from the flat springs ca.120mm, holding fixture for flat springs from plastic, Package Contents: axle shaft, flat springs, holding fixture for flat springs and fixing parts Item code : 907354
    Add to wishlist
    Add to cart
    Quick view