Tamiya chassis frame profile
24,49 €
incl. 19% VAT plus Shipping
Tamiya chassis frame profile, from blank drawn aluminium with radius edges, measure: height 21mm, width 7mm, thickness 1,5mm, length 1m , 2 pieces per set.
Item code 907063
In stock
Description
Tamiya chassis frame profile, from blank drawn aluminium with radius edges, measure: height 21mm, width 7mm, thickness 1,5mm, length 1m , 2 pieces per set
Additional information
| Weight | 1 kg |
|---|---|
| Lieferzeit |
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
Related products
Pivoted bogie with axle
incl. 19% VAT
plus Shipping
Pivoted bogie with axle, scale 1/14, bogie for self-construction of trailer chassis, made of sheet steel, dimensions: length with drawbar 265mm, without 95mm, width with axle 165mm, without 100m, height 75mm, content: 1 set of steel parts for bogie, 1 plastic drawbar, 1 axle with dummy air springs, 1 pivot bearing with sliding washers, fastening material, instructions
Technical details:
- Bogie made of sheet steel in sandwich construction
- Bearing mounted bogie (adjustable) with sliding pad for easy maneuvering
- Drawbar (one-piece) made of fiber
-reinforced plastic with checkered plate application
- The drawbar is held by two tension springs for easier attachment
- Coupling height 75 mm- Trailer axle with dummy air suspensionDanger!
Attention! Not suitable for children under 14 years.
item code: 907625
Four-wheel transfer case 2:1 with self-locking differential
incl. 19% VAT
plus Shipping
Four -wheel transfer case with self-locking differential, for the scale 1:16 to 1:10, reduction ratio 2:1, permanent four-wheel drive, self-locking differential to compensate for differences in the drivetrain, housing made of aluminum, 8 ball bearings, input and output shafts 5mm, hardened gears, with mounting bracket (62mm wide), suitable for frame widths of 60-63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
item code: 251205
Warning! Not suitable for children under 14 years.
Windshield wiper – set
incl. 19% VAT
plus Shipping
Windshield wiper - set, scale 1/14, suitable for construction machines, buses, snowcats and so on, from plastic, included: a big doublearm-wiper and a small wiper, measure: small wiper: total length 42mm, wiper plade 31mm, arbor hole 2mm, big wiper: length from the wiper plade 60mm, from the arm 53mm, arbor hole 2mm, the set included 5 pices
Item code : 907369
3-speed gearbox with transfer case
incl. 19% VAT
plus Shipping
3-speed gearbox with transfer case, for all-wheel drive, gearbox housing made of aluminum, hardened steel gears, 8-way ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11.32: 1, 3rd gear 5.66: 1. Dim. without motor 80mm, width 46.6mm, height 64mm, The output shafts have a diameter of 5mm.
The front axle can be switched on with a servo. The gears are switched by a second servo. The gearbox is mounted, the max. input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the transmission housing. The frame width should be between 60-63mm.
Contents: 1 manual gearbox with distributor, fixing screws, linkages
Item code: 251105
Reviews
There are no reviews yet.