TRANSFERCASE FOR 4WD DRIVE 1:1
107,80 € 97,02 €
Planetary gear metal
27,40 € 24,66 €
Planetary gear plastic
16,40 € 14,76 €
incl. 19% VAT plus Shipping
Planetary gear plastic, speed reduction 6:1, output shaft 4mm, housing and gear wheels from plastic
Item code 224504
In stock
Description
Planetary gear plastic, speed reduction 6:1, output shaft 4mm, housing and gear wheels from plastic, suitable for all 500er motors, max.engine speed 10.000 U/min , matching gear holder under item code 224501
Additional information
| Lieferzeit |
|---|
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
You may also like…
Cardan taker, 4mm bore
incl. 19% VAT
plus Shipping
Cardan taker, 4mm bore, made of steel, with transverse bore M3 for mounting on the drive shaft, suitable for the rear axle item code: 251210, for cardan shaft assembly item code: 224489, for double cardan item code: 224490 and to the planetary gears item code: 215589, 224503 and 224504, Contents: 2 drivers, 2 stud bolts M3x3
item code: 224499
Warning! Not suitable for children under 14 years.
Related products
3-speed gearbox with transfer case and self-locking differential
incl. 19% VAT
plus Shipping
3-speed gearbox with transfer case, permanent four-wheel drive, self-locking differential to compensate for the speed differences in the drive train, gear housing made of aluminum, hardened gears made of steel, 10-times ball bearing, suitable for the scale 1:16 - 1:10, reductions: 1st gear 22.65: 1, 2nd gear 11.32: 1, 3rd gear 5.66: 1. Dim. Length without motor 80mm, width 46.6mm, height 64mm, The output shafts have a diameter of 5mm.
The gears are switched by a servo. The gearbox is mounted, the max. Input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the transmission housing. The frame width should be between 60-63mm.
Contents: 1 manual gearbox with distributor, fixing screws, linkages
item code: 251106
Warning! Not suitable for children under 14 years.
Four-wheel transfer case 2:1 with self-locking differential
incl. 19% VAT
plus Shipping
Four -wheel transfer case with self-locking differential, for the scale 1:16 to 1:10, reduction ratio 2:1, permanent four-wheel drive, self-locking differential to compensate for differences in the drivetrain, housing made of aluminum, 8 ball bearings, input and output shafts 5mm, hardened gears, with mounting bracket (62mm wide), suitable for frame widths of 60-63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
item code: 251205
Warning! Not suitable for children under 14 years.
2-speed control gear box
incl. 19% VAT
plus Shipping
2-speed control gear box, suitable for the Dunker motor with item code: 221259, ball bearing triple, speed-reduction 1.gear 2:1 , 2.gear 1:1 , switching during the driving it`s posible with a servo, housing from aluminum, driving shaft SW5, shaft and pinion`s are hardened, initial speed max. 6000 U/min, control rod and fixing part`s are included, for fixed it with an other motor you need the adaptor with item code: 220324
Item code: 242424
3-speed gearbox with transfer case
incl. 19% VAT
plus Shipping
3-speed gearbox with transfer case, for all-wheel drive, gearbox housing made of aluminum, hardened steel gears, 8-way ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11.32: 1, 3rd gear 5.66: 1. Dim. without motor 80mm, width 46.6mm, height 64mm, The output shafts have a diameter of 5mm.
The front axle can be switched on with a servo. The gears are switched by a second servo. The gearbox is mounted, the max. input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the transmission housing. The frame width should be between 60-63mm.
Contents: 1 manual gearbox with distributor, fixing screws, linkages
Item code: 251105
3-speed gearbox
incl. 19% VAT
plus Shipping
3-speed gearbox, gearbox housing made of aluminum, hardened gears made of steel, 6 ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11,32: 1 , 3nd gear 5.66: 1. Dim. Length without motor 65mm, width 46,6mm, height 39,4mm, shaft exit 5mm diameter
The gearbox is mounted, the motor and the matching flange are attached from the outside via two terminals on the gearbox, is switched by a servo, the max. Input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the gear housing. The frame width should be between 60-63mm
Contents: 1 manual transmission, fixing screws, ball heads
Item code: 251100
Reviews
There are no reviews yet.