Planetary gear metal
27,40 €
incl. 19% VAT plus Shipping
Planetary gear metal, speed reduction 6:1, output shaft 4mm, housing from plastic
Item code 224503
In stock
Description
Planetary gear metal, speed reduction 6:1, output shaft 4mm, housing from plastic, gear wheels from steel, suitable for all 500er motors, max.engine speed 10.000 U/min , matching gear holder under item code 224501
Additional information
| Lieferzeit |
|---|
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
You may also like…
Cardan taker, 4mm bore
incl. 19% VAT
plus Shipping
Cardan taker, 4mm bore, made of steel, with transverse bore M3 for mounting on the drive shaft, suitable for the rear axle item code: 251210, for cardan shaft assembly item code: 224489, for double cardan item code: 224490 and to the planetary gears item code: 215589, 224503 and 224504, Contents: 2 drivers, 2 stud bolts M3x3
item code: 224499
Warning! Not suitable for children under 14 years.
Related products
Four-wheel transfer case 2:1 with self-locking differential
incl. 19% VAT
plus Shipping
Four -wheel transfer case with self-locking differential, for the scale 1:16 to 1:10, reduction ratio 2:1, permanent four-wheel drive, self-locking differential to compensate for differences in the drivetrain, housing made of aluminum, 8 ball bearings, input and output shafts 5mm, hardened gears, with mounting bracket (62mm wide), suitable for frame widths of 60-63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
item code: 251205
Warning! Not suitable for children under 14 years.
Transfer case 4WD 2:1
incl. 19% VAT
plus Shipping
Transfer case 4WD, for the scale 1:16 to 1:10, housing made of aluminum, ball bearing 6 times, reduction ratio 2:1, input and output shafts 5mm, hardened gears, front axle connectable, with mounting bracket (62mm wide), suitable for frame widths of 60 -63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
Item code 251195
TRANSFERCASE FOR 4WD DRIVE 1:1
incl. 19% VAT
plus Shipping
Transfer case, for the scale 1:16 to 1:10, housing made of aluminum, ball bearing 6 times, reduction ratio 1: 1, input and output shafts 5mm, hardened gears, front axle connectable, with mounting bracket (62mm wide), suitable for frame widths of 60 -63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
Item code 251190
Dunker motor 12 Volt
incl. 19% VAT
plus Shipping
Dunker motor 12 Volt, Nennspg. 12 Volt, agitator speed from the engine idle 3600 U/min, current at the engine idle 0,6 A, speed rating 3100 U/min, Leistung 44,5 W, rating current 5,2 A, starting torque 82 Ncm, rated torque 13,7 Ncm, power efficiency 71%, weightt 1200g, suitable with the 2-speed control gear box with item code 242424
Item code: 221259
2-speed control gear box
incl. 19% VAT
plus Shipping
2-speed control gear box, suitable for the Dunker motor with item code: 221259, ball bearing triple, speed-reduction 1.gear 2:1 , 2.gear 1:1 , switching during the driving it`s posible with a servo, housing from aluminum, driving shaft SW5, shaft and pinion`s are hardened, initial speed max. 6000 U/min, control rod and fixing part`s are included, for fixed it with an other motor you need the adaptor with item code: 220324
Item code: 242424
3-speed gearbox with transfer case
incl. 19% VAT
plus Shipping
3-speed gearbox with transfer case, for all-wheel drive, gearbox housing made of aluminum, hardened steel gears, 8-way ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11.32: 1, 3rd gear 5.66: 1. Dim. without motor 80mm, width 46.6mm, height 64mm, The output shafts have a diameter of 5mm.
The front axle can be switched on with a servo. The gears are switched by a second servo. The gearbox is mounted, the max. input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the transmission housing. The frame width should be between 60-63mm.
Contents: 1 manual gearbox with distributor, fixing screws, linkages
Item code: 251105
3-speed gearbox
incl. 19% VAT
plus Shipping
3-speed gearbox, gearbox housing made of aluminum, hardened gears made of steel, 6 ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11,32: 1 , 3nd gear 5.66: 1. Dim. Length without motor 65mm, width 46,6mm, height 39,4mm, shaft exit 5mm diameter
The gearbox is mounted, the motor and the matching flange are attached from the outside via two terminals on the gearbox, is switched by a servo, the max. Input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the gear housing. The frame width should be between 60-63mm
Contents: 1 manual transmission, fixing screws, ball heads
Item code: 251100
Reviews
There are no reviews yet.