Cardan taker, 4mm bore
Cardan taker, 4mm bore, made of steel, with transverse bore M3 for mounting on the drive shaft, suitable for the rear axle item code: 251210, for cardan shaft assembly item code: 224489, for double cardan item code: 224490 and to the planetary gears item code: 215589, 224503 and 224504, Contents: 2 drivers, 2 stud bolts M3x3
item code: 224499
Warning! Not suitable for children under 14 years.
MB Arocs headlamp 12V
MB Arocs headlamp 12V, suitable for the Arocs tractor and the Arcos tipper Tamiya, 6 light functions: turn signal front, side marker lamp with turn signal function (as the original vehicle lights the turn signal brighter than the marker lamp), parking lights, headlights, high beam and Fog lights, colored litz wire with a length of approx. 20cm, contents: 1 left and 1 right lighting board, mounting material, installation instructions
Attention: Not suitable for the MFC of Tamiya
item code: 907597
Warning! Not suitable for children under 14 years.
MB Arocs headlamp 7.2V
MB Arocs headlamp 7.2V, suitable for the Arocs tractor and the Arcos tipper Tamiya, 6 light functions: turn signal front, side marker lamp with turn signal function (as the original vehicle lights the turn signal brighter than the marker lamp), parking lights, headlights, high beam and Fog lights, colored litz wire with a length of approx. 20cm, contents: 1 left and 1 right lighting board, mounting material, installation instructions
Attention: Not suitable for the MFC of Tamiya
item code: 907596
Warning! Not suitable for children under 14 years.
Top light holder MB Arocs
Top light holder MB Arocs, scale 1/14, suitable for the Arocs of Tamiya, plastic top light holder, headlight housing in black, four holders for the additional mounting of worklights (item code: 907144 and 907578), Contents: 1 Top light holder, 4 headlamp housing , 4 clear glasses, 4 blue glasses, 4 holders, mounting material and instructions (delivery without bulbs)
item code: 907599
Warning! Not suitable for children under 14 years.
6-chamber tail light with lighting board 7.2 volt
6-chamber tail light with lighting board 7.2 volt, ready-made, suitable for the scale 1/16 – 1 / 14.5, with plastic inserts for better illumination of the individual chambers, equipped with SMD LEDs, common positive pole, 5 light functions: turn signal, brake light, Driving light + position light, reversing lamp and fog lamp, cable length approx. 60cm, dim .: LxWxH: 38x11x6,5mm, content: 1 tail light left, 1 tail light right, 4 fixing screws M2x6, instructions
item code: 191531
Warning! Not suitable for children under 14 years
6-chamber tail light with lighting board 12 volt
6-chamber tail light with lighting board 12 volt, ready-made, suitable for the scale 1/16 - 1 / 14.5, with plastic inserts for better illumination of the individual chambers, equipped with SMD LEDs, common positive pole, 5 light functions: turn signal, brake light, Driving light + position light, reversing lamp and fog lamp, cable length approx. 60cm, dim .: LxWxH: 38x11x6,5mm, content: 1 tail light left, 1 tail light right, 4 fixing screws M2x6, instructions
item code: 191532
Warning! Not suitable for children under 14 years
7-chamber tail light with lighting board 12 volts
7-chamber tail light with lighting board 12 volts, ready assembled, suitable for the scale 1/16 - 1 / 14.5, with plastic inserts for better illumination of the individual chambers, fitted with SMD LEDs, common positive pole, 4 light functions: turn signals, Taillight, brake light and reversing light, cable length approx. 60cm, dim .: LxWxH: 32x12x7mm, content: 1 tail light left, 1 tail light right, 4 fastening screws M2x6, instructions
item code: 191537
Warning! Not suitable for children under 14 years
7-chamber tail light with lighting board 7.2 volts
7-chamber tail light with lighting board 7.2 volts, ready assembled, suitable for the scale 1/16 - 1 / 14.5, with plastic inserts for better illumination of the individual chambers, fitted with SMD LEDs, common positive pole, 4 light functions: turn signals, Taillight, brake light and reversing light, cable length approx. 60cm, dim .: LxWxH: 32x12x7mm, content: 1 tail light left, 1 tail light right, 4 fastening screws M2x6, instructions
item code: 191536
Warning! Not suitable for children under 14 years
Tank bracket set
Tank bracket set, suitable for the 3-axle Arocs (not suitable for the new tipper) and Actros from Tamiya, for attaching the tanks to the frame when the original battery compartment is removed. Contents: 2 aluminum brackets, mounting screws, instructions
item no: 907584
Warning! Not suitable for children under 14 years.
Truck antenna set universal
3-speed gearbox with transfer case and self-locking differential
3-speed gearbox with transfer case, permanent four-wheel drive, self-locking differential to compensate for the speed differences in the drive train, gear housing made of aluminum, hardened gears made of steel, 10-times ball bearing, suitable for the scale 1:16 - 1:10, reductions: 1st gear 22.65: 1, 2nd gear 11.32: 1, 3rd gear 5.66: 1. Dim. Length without motor 80mm, width 46.6mm, height 64mm, The output shafts have a diameter of 5mm.
The gears are switched by a servo. The gearbox is mounted, the max. Input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the transmission housing. The frame width should be between 60-63mm.
Contents: 1 manual gearbox with distributor, fixing screws, linkages
item code: 251106
Warning! Not suitable for children under 14 years.
Four-wheel transfer case 2:1 with self-locking differential
Four -wheel transfer case with self-locking differential, for the scale 1:16 to 1:10, reduction ratio 2:1, permanent four-wheel drive, self-locking differential to compensate for differences in the drivetrain, housing made of aluminum, 8 ball bearings, input and output shafts 5mm, hardened gears, with mounting bracket (62mm wide), suitable for frame widths of 60-63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
item code: 251205
Warning! Not suitable for children under 14 years.