Plast. Parts Trailersus. w/8mm lift
29,99 €
incl. 19% VAT plus Shipping
Plast. Parts Trailersus. w/8mm lift, scale 1/14, made of plastic, for converting the existing air suspension axle, suitable for all Carson trailers up to 09/21 (except for all low-loaders), optionally with 8mm lift, the new plastic parts and the air bellows allow a higher spring travel and a larger twisting of the axle, one set is required for each trailer axle, the metal parts and the assembly material are taken over from the existing axle, Content: 1 set of standard swing arms, 1 set of swing arms with + 8mm lift, 1 set of brackets, 2 air bellows
item code: 907644
Caution! Not suitable for children under 14 years of age.
In stock
Description
Plast. Parts Trailersus. w/8mm lift, scale 1/14, made of plastic, for converting the existing air suspension axle, suitable for all Carson trailers up to 09/21 (except for all low-loaders), optionally with 8mm lift, the new plastic parts and the air bellows allow a higher spring travel and a larger twisting of the axle, one set is required for each trailer axle, the metal parts and the assembly material are taken over from the existing axle, Content: 1 set of standard swing arms, 1 set of swing arms with + 8mm lift, 1 set of brackets, 2 air bellows
Caution! Not suitable for children under 14 years of age.
Additional information
| Weight | 0,070 kg |
|---|---|
| Dimensions | 26 × 12 × 3 cm |
Product safety
Product safety
Shipping & Delivery
Related products
Pivoted bogie with axle
incl. 19% VAT
plus Shipping
Pivoted bogie with axle, scale 1/14, bogie for self-construction of trailer chassis, made of sheet steel, dimensions: length with drawbar 265mm, without 95mm, width with axle 165mm, without 100m, height 75mm, content: 1 set of steel parts for bogie, 1 plastic drawbar, 1 axle with dummy air springs, 1 pivot bearing with sliding washers, fastening material, instructions
Technical details:
- Bogie made of sheet steel in sandwich construction
- Bearing mounted bogie (adjustable) with sliding pad for easy maneuvering
- Drawbar (one-piece) made of fiber
-reinforced plastic with checkered plate application
- The drawbar is held by two tension springs for easier attachment
- Coupling height 75 mm- Trailer axle with dummy air suspensionDanger!
Attention! Not suitable for children under 14 years.
item code: 907625
Rear light board with housing Volvo FH16 tow truck
incl. 19% VAT
plus Shipping
Rear light board with housing, scale 1/14, suitable for the Tamiya Volvo FH16 tow truck, from 7.2 to 12 volts, the following light functions: rear light with position light, left and right indicators, reversing light, fog light and brake light, metal rear light mask, cable length approx. 80cm, content: 1 right rear light, 1 left rear light, 2 metal rear light masks, tape, instructions
Attention! Not suitable for children under 14 years.
item code: 907632
Ramp set Low loader GH TU4
incl. 19% VAT
plus Shipping
Ramp set Low loader GH TU4, scale 1/14, one-piece ramps with wooden application for self-construction or as a spare part suitable for 907400 Goldhofer TU4 low loader trailer 4-axle, all parts required for assembly are included in the scope of delivery, contents: 2 ramps, mounting hardware, wooden support, assembly instructions
Attention! Not suitable for children under 14 years.
item code: 907628
VOLVO FH16 REAR LIGHT
incl. 19% VAT
plus Shipping
Volvo FH16 rear light, scale 1/14, suitable for the Volvo FH16 from Tamiya, from 7.2 to 12 volts, true-to-original light functions and look of the rear lights with the following functions: brake light, reversing light, fog light, parking light, indicator l + r, cable length approx 75cm, content: 1 set of housings with built-in circuit board
Warning: Not suitable for the MFC from Tamiya
Attention! Not suitable for children under 14 years.
item code: 907508
Volvo FH16 headlight insert with daytime running lights
incl. 19% VAT
plus Shipping
Volvo FH16 headlight insert with daytime running lights, scale 1/14, suitable for Tamiya FH16, from 7.2 to 14 volts, reflector with circuit board and daytime running lights "V", light functions: daytime running lights (burns with 100% brightness), low beam (brightness of daytime running lights reduced automatically to 25%), turn signals l + r, fog lights, high beam, cornering lights, cover caps, cable length approx. 25 cm, fastening material, installation instructions, content: 1 set of reflector with circuit board l + r, 1 set of cover caps, fastening material
Warning: Not suitable for the MFC from Tamiya
Attention! Not suitable for children under 14 years.
item code: 907507
1/14 driven front axle with self-locking differential
incl. 19% VAT
plus Shipping
1/14 driven front axle with self-locking differential
The CARSON drive concept for TAMIYA® Trucks in 1:14 scale. Equip your TAMIYA 2- or 3-axis TAMIYA tractor to the all-wheel all-wheel drive with our self-locking axles. The components can be easily replaced, as these are installed at the existing mounting points. A great advantage of these axles is that no further space is required for a shift servo (linkages and bowden cables), since this automatically locks automatically / automatically in case of a traction loss. Officially licensed by ZF Friedrichshafen AG.
The axle is equipped with a self-locking differential and can be built either with or without throughput, both shafts and housing covers are included. With a traction loss, the differential locks automatically / automatically and generates 100% traction. A major advantage of this drive axle is that NO shifter servos, Bowden cables and linkages are required for the differential locks, which also benefits the clarity and space offer in the chassis. The axle components are housed in a high-load-bearing reinforced plastic axle housing and are ideally suited for every construction site application.
• The front axle is modeled in detail
• Reinforced plastic axle housing
• CNC machined aluminum stub / steering lever
• High ground clearance thanks to a "slim" differential housing (height 33 mm)
• 16-way ball bearing
• Self-locking differential (shifter servo, linkages and Bowden cables are not required)
• Hardened steel bevel gears
• Axis ratio 1: 2.66
• Maximum steering angle 42 °
• 5 mm transmission / input shaft
• Aluminum rim driver 12 mm hexagonal
• Simple conversion to the axis with and without through-feed (both shafts and housing covers are included in the kit)
• Dimensions front axle LxBxH: 44 x 160 x 33 mm
• Weight approx. 175 g
• Matching aluminum rims (front driven) Art.-No. 907272 10-hole design narrow design and 907278 10-hole design wide design
12 (mm hex wrench)
• Incl. Tie rod
• The mounting kit (907280) is required to mount the front axle
item code 907267
Semitrailer with flat springs
incl. 19% VAT
plus Shipping
Semitrailer axle with flat springs, scale 1/14, axle shaft from steel, diameter of the axle 6mm, axle bolt 5mm, total width ca. 168mm, length of the flat springs ca.87mm, distance from centre to centre from the flat springs ca.112mm, holding fixture for flat springs from plastic, suitable for a width of frame from 96mm, Package Contents: axle shaft, flat springs, holding fixture for flat springs and fixing parts
Item code : 907355