Transfer gear box with differential
115,50 €
incl. 19% VAT plus Shipping
Transfer gear box with differential for balancing 1:3, scale 1:8, housing from aluminum, sprocket from steel, hardened, speed reduction 3:1, one input – and two output-shaft`s with SW5, holder from aluminum
Item code: 216119
In stock
Description
Transfer gear box with differential for balancing 1:3, scale 1:8, housing from aluminum, sprocket from steel, hardened, speed reduction 3:1, one input – and two output-shaft`s with SW5, holder from aluminum
Additional information
| Weight | 1 kg |
|---|---|
| Lieferzeit |
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
Related products
1/8 transfer case with differential, reduction ratio 1:1
incl. 19% VAT
plus Shipping
Transfer case with longitudinal differential, scale 1/8, reduction ratio 1:1, permanent all-wheel drive, milled aluminum housing, hardened steel gears, multiple ball bearings, input and output shafts with 5mm hexagon, aluminum mounting bracket, weight: 330g, dimensions: housing (wxhxl) 69x44x50mm, total length with hexagon shafts 73mm, contents: 1 transfer case with bracket and mounting screws
item code: 216140
Caution! Not suitable for children under 14 years of age.
1/8 transfer case selectable, reduction ratio 1:1
incl. 19% VAT
plus Shipping
Transfer case selectable, scale 1/8, reduction ratio 1:1, front axle selectable via servo, milled aluminium housing, hardened steel gears, multiple ball bearings, input and output shafts with hexagon 5mm, shift shaft and shift rod made of 3mm steel, mounting bracket made of aluminium, weight: 360g, dim. Housing (wxhxl) 69x44x50mm, total length with hexagonal shafts 73mm, Contents: 1 transfer case with bracket, shift rod, ball heads and fixing screws
item code: 216130
Caution! Not suitable for children under 14 years of age.
Transfer case 4WD 2:1
incl. 19% VAT
plus Shipping
Transfer case 4WD, for the scale 1:16 to 1:10, housing made of aluminum, ball bearing 6 times, reduction ratio 2:1, input and output shafts 5mm, hardened gears, front axle connectable, with mounting bracket (62mm wide), suitable for frame widths of 60 -63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
Item code 251195
TRANSFERCASE FOR 4WD DRIVE 1:1
incl. 19% VAT
plus Shipping
Transfer case, for the scale 1:16 to 1:10, housing made of aluminum, ball bearing 6 times, reduction ratio 1: 1, input and output shafts 5mm, hardened gears, front axle connectable, with mounting bracket (62mm wide), suitable for frame widths of 60 -63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
Item code 251190
3-speed gearbox
incl. 19% VAT
plus Shipping
3-speed gearbox, gearbox housing made of aluminum, hardened gears made of steel, 6 ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11,32: 1 , 3nd gear 5.66: 1. Dim. Length without motor 65mm, width 46,6mm, height 39,4mm, shaft exit 5mm diameter
The gearbox is mounted, the motor and the matching flange are attached from the outside via two terminals on the gearbox, is switched by a servo, the max. Input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the gear housing. The frame width should be between 60-63mm
Contents: 1 manual transmission, fixing screws, ball heads
Item code: 251100
Reviews
There are no reviews yet.