Trailer axle with lift kit + 8mm
82,99 €
incl. 19% VAT plus Shipping
Trailer axle with lift kit + 8mm, scale 1/14, the new generation of CARSON trailer axles with dummy air springs and lift kit. Bumps are cushioned even better by the new, softer rubber bellows and offer a driving pattern that is absolutely true to the original. The two suspensions included (standard & with raised height + 8mm) offer you the option of adapting your trailer to your higher (+ 8mm) tractor from the saddle level. Content: Trailer axle with lift kit, attachments, assembly instructions
Item No. 907643
Caution! Not suitable for children under 14 years of age.
In stock
Description
Trailer axle with lift kit + 8mm, scale 1/14, the new generation of CARSON trailer axles with dummy air springs and lift kit. Bumps are cushioned even better by the new, softer rubber bellows and offer a driving pattern that is absolutely true to the original. The two suspensions included (standard & with raised height + 8mm) offer you the option of adapting your trailer to your higher (+ 8mm) tractor from the saddle level. Content: Trailer axle with lift kit, attachments, assembly instructions
Caution! Not suitable for children under 14 years of age.
Product safety
Reviews (0)
Shipping & Delivery
You may also like…
Related products
Ramp set Low loader GH TU4
incl. 19% VAT
plus Shipping
Ramp set Low loader GH TU4, scale 1/14, one-piece ramps with wooden application for self-construction or as a spare part suitable for 907400 Goldhofer TU4 low loader trailer 4-axle, all parts required for assembly are included in the scope of delivery, contents: 2 ramps, mounting hardware, wooden support, assembly instructions
Attention! Not suitable for children under 14 years.
item code: 907628
1/16 rear rim adapter for single tires
incl. 19% VAT
plus Shipping
1/16 rear rim adapter for single tires, made of aluminum, suitable for the rear axle Art.No. 251210, with 2 bolt circles 21/22 mm, thread M1.6mm, hub cover with O-ring for easy dismantling, content: 2 rim adapters, 2 hub covers, 2 O-rings, 20 cap screws M1.6x4mm, suitable for our plastic and aluminum rims
Attention! Not suitable for children under 14 years.
item code: 220961
Volvo FH16 headlight insert with daytime running lights
incl. 19% VAT
plus Shipping
Volvo FH16 headlight insert with daytime running lights, scale 1/14, suitable for Tamiya FH16, from 7.2 to 14 volts, reflector with circuit board and daytime running lights "V", light functions: daytime running lights (burns with 100% brightness), low beam (brightness of daytime running lights reduced automatically to 25%), turn signals l + r, fog lights, high beam, cornering lights, cover caps, cable length approx. 25 cm, fastening material, installation instructions, content: 1 set of reflector with circuit board l + r, 1 set of cover caps, fastening material
Warning: Not suitable for the MFC from Tamiya
Attention! Not suitable for children under 14 years.
item code: 907507
1/14 driven front axle with self-locking differential
incl. 19% VAT
plus Shipping
1/14 driven front axle with self-locking differential
The CARSON drive concept for TAMIYA® Trucks in 1:14 scale. Equip your TAMIYA 2- or 3-axis TAMIYA tractor to the all-wheel all-wheel drive with our self-locking axles. The components can be easily replaced, as these are installed at the existing mounting points. A great advantage of these axles is that no further space is required for a shift servo (linkages and bowden cables), since this automatically locks automatically / automatically in case of a traction loss. Officially licensed by ZF Friedrichshafen AG.
The axle is equipped with a self-locking differential and can be built either with or without throughput, both shafts and housing covers are included. With a traction loss, the differential locks automatically / automatically and generates 100% traction. A major advantage of this drive axle is that NO shifter servos, Bowden cables and linkages are required for the differential locks, which also benefits the clarity and space offer in the chassis. The axle components are housed in a high-load-bearing reinforced plastic axle housing and are ideally suited for every construction site application.
• The front axle is modeled in detail
• Reinforced plastic axle housing
• CNC machined aluminum stub / steering lever
• High ground clearance thanks to a "slim" differential housing (height 33 mm)
• 16-way ball bearing
• Self-locking differential (shifter servo, linkages and Bowden cables are not required)
• Hardened steel bevel gears
• Axis ratio 1: 2.66
• Maximum steering angle 42 °
• 5 mm transmission / input shaft
• Aluminum rim driver 12 mm hexagonal
• Simple conversion to the axis with and without through-feed (both shafts and housing covers are included in the kit)
• Dimensions front axle LxBxH: 44 x 160 x 33 mm
• Weight approx. 175 g
• Matching aluminum rims (front driven) Art.-No. 907272 10-hole design narrow design and 907278 10-hole design wide design
12 (mm hex wrench)
• Incl. Tie rod
• The mounting kit (907280) is required to mount the front axle
item code 907267
1/14 Rear axle w/Diff.-Lock&fixed drive
incl. 19% VAT
plus Shipping
1/14 Rear axle w/Diff.-Lock&fixed drive
Official licensed by ZF Friedrichshafen AG.
The CARSON drive concept for TAMIYA trucks in 1:14 scale
Equip your TAMIYA 2- or 3-axis TAMIYA tractor to the all-wheel all-wheel drive with our self-locking axles. The components can be easily replaced, as these are installed at the existing mounting points. A huge advantage of these axles is that there is no need for additional space for a shift servo (linkages and bowden cables), since this automatically locks automatically / automatically when there is a traction loss. Officially licensed by ZF Friedrichshafen AG.
- Detailed rear axle
- Reinforced plastic axle housing
- High ground clearance thanks to a slim? Differential housing (height 33 mm)
- 12-way ball bearing
- Hardened steel bevel gears
- axle ratio 1: 2,66
- 5 mm transmission / input shaft
- Aluminum rim driver 12 mm hexagon
- Easy conversion to the axle with and without drive (both shafts and housing covers are included in the axle kit)
- Dimensions rear axle LxBxH: 44 x 135 x 33 mm
- Weight approx. 150 g
- Delivered as kit with pre-assembled differential
- Suitable for TAMIYA suspension and independent suspension
- Suitable for all TAMIYA and CARSON truck rims with 12 mm hexagonal driver
- Self-locking differential (shifter servo, linkages and Bowden cables are not required)
item code 907268
Flat bed axle with flat springs
incl. 19% VAT
plus Shipping
Flat bed axle with flat spings, scale 1/14, axle shaft from steel, diameter of the axle 6mm, axle bolt 5mm, total width ca. 176mm, length of the flat springs ca.70mm, distance from middle to middle from the flat springs ca.120mm, holding fixture for flat springs from plastic, Package Contents: axle shaft, flat springs, holding fixture for flat springs and fixing parts
Item code : 907354
Reviews
There are no reviews yet.