Top light holder MB Arocs
71,99 €
incl. 19% VAT plus Shipping
Top light holder MB Arocs, scale 1/14, suitable for the Arocs of Tamiya, plastic top light holder, headlight housing in black, four holders for the additional mounting of worklights (item code: 907144 and 907578), Contents: 1 Top light holder, 4 headlamp housing , 4 clear glasses, 4 blue glasses, 4 holders, mounting material and instructions (delivery without bulbs)
item code: 907599
Warning! Not suitable for children under 14 years.
In stock
Description
Top light holder MB Arocs, scale 1/14, suitable for the Arocs of Tamiya, plastic top light holder, headlight housing in black, four holders for the additional mounting of worklights (item code: 907144 and 907578), Contents: 1 Top light holder, 4 headlamp housing , 4 clear glasses, 4 blue glasses, 4 holders, mounting material and instructions (delivery without bulbs)
Additional information
| Weight | 0,1 kg |
|---|---|
| Lieferzeit |
Product safety
Product safety
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
You may also like…
RECATULAR SPOTLIGHT 12VOLT
RECATULAR SPOTLIGHT, scale 1/14, with lighting board 12 Volt, , housing from plastic, glass fluted, measure: housing 8,5 x 8,5mm, depth 7mm, total height with foot 14mm, fastener Ø 2mm x 2,5mm length, lighting board 4,8 x 4mm, length of the cable 20cm, included: 2 housings black, 2 glasses, 2 resistors, 2 lighting boards with cable, instruction
Item code : 907578
Angel Eyes LED board for 7,2 und 12 Volt, white
Angel Eyes LED board for 7,2 und 12 Volt, white, two operation`s for the light, the ring from the side light`s shine white, the traveling light shine white, suitable for all top light and front light holder, also for the auxiliary head light`s, included: 2 board`s with a cable with a length from 20cm, 2 reflector, 1 diode for 12 Volt operation, instruction
Item code: 907555
Not compatible with the MFC from Tamiya
Angel Eyes LED board for 7,2 und 12 Volt, blue
Angel Eyes LED board for 7,2 und 12 Volt, blue, two operation`s for the light, the ring from the side light`s shine blue, the traveling light shine white, suitable for all top light and front light holder, also for the auxiliary head light`s, included: 2 board`s with a cable with a length from 20cm, 2 reflector, 1 diode for 12 Volt operation, instruction
Item code : 907554
Not compatible with the MFC from Tamiya
Top light LED board, 12 Volts
Top light LED board, 12 Volt, with a SMD and series resistance, length from the cable 20cm, diameter from the board 8mm, suitable for the front light and top light holder with item code: 907064, 907065, 907076, 907095, 907124 and 907134, also for the top light - set`s with item code: 907575 und 907052, included: 2 boards
Item code : 907399
RECATULAR SPOTLIGHT 7,2Volt
RECATULAR SPOTLIGHT, scale 1/14, with lighting board 7.2 Volt, , housing from plastic, glass fluted, measure: housing 8,5 x 8,5mm, depth 7mm, total height with foot 14mm, fastener Ø 2mm x 2,5mm length, lighting board 4,8 x 4mm, length of the cable 20cm, included: 2 housings black, 2 glasses, 2 resistors, 2 lighting boards with cable, instruction
Caution! Not suitable for children under the age of 14.
Item code : 907144
Top light LED board, 7,2 Volts
Top light LED board, 7,2 Volt, with a SMD and series resistance, length from the cable 20cm, diameter from the board 8mm, suitable for the front light and top light holder with item code: 907064, 907065, 907076, 907095, 907124, also for the top light - set`s with item code: 907575 und 907052, included: 2 boards
Item code : 907184
Related products
1/14 driven front axle with self-locking differential
1/14 driven front axle with self-locking differential
The CARSON drive concept for TAMIYA® Trucks in 1:14 scale. Equip your TAMIYA 2- or 3-axis TAMIYA tractor to the all-wheel all-wheel drive with our self-locking axles. The components can be easily replaced, as these are installed at the existing mounting points. A great advantage of these axles is that no further space is required for a shift servo (linkages and bowden cables), since this automatically locks automatically / automatically in case of a traction loss. Officially licensed by ZF Friedrichshafen AG.
The axle is equipped with a self-locking differential and can be built either with or without throughput, both shafts and housing covers are included. With a traction loss, the differential locks automatically / automatically and generates 100% traction. A major advantage of this drive axle is that NO shifter servos, Bowden cables and linkages are required for the differential locks, which also benefits the clarity and space offer in the chassis. The axle components are housed in a high-load-bearing reinforced plastic axle housing and are ideally suited for every construction site application.
• The front axle is modeled in detail
• Reinforced plastic axle housing
• CNC machined aluminum stub / steering lever
• High ground clearance thanks to a "slim" differential housing (height 33 mm)
• 16-way ball bearing
• Self-locking differential (shifter servo, linkages and Bowden cables are not required)
• Hardened steel bevel gears
• Axis ratio 1: 2.66
• Maximum steering angle 42 °
• 5 mm transmission / input shaft
• Aluminum rim driver 12 mm hexagonal
• Simple conversion to the axis with and without through-feed (both shafts and housing covers are included in the kit)
• Dimensions front axle LxBxH: 44 x 160 x 33 mm
• Weight approx. 175 g
• Matching aluminum rims (front driven) Art.-No. 907272 10-hole design narrow design and 907278 10-hole design wide design
12 (mm hex wrench)
• Incl. Tie rod
• The mounting kit (907280) is required to mount the front axle
item code 907267
1/14 Rear axle w/Diff.-Lock&fixed drive
1/14 Rear axle w/Diff.-Lock&fixed drive
Official licensed by ZF Friedrichshafen AG.
The CARSON drive concept for TAMIYA trucks in 1:14 scale
Equip your TAMIYA 2- or 3-axis TAMIYA tractor to the all-wheel all-wheel drive with our self-locking axles. The components can be easily replaced, as these are installed at the existing mounting points. A huge advantage of these axles is that there is no need for additional space for a shift servo (linkages and bowden cables), since this automatically locks automatically / automatically when there is a traction loss. Officially licensed by ZF Friedrichshafen AG.
- Detailed rear axle
- Reinforced plastic axle housing
- High ground clearance thanks to a slim? Differential housing (height 33 mm)
- 12-way ball bearing
- Hardened steel bevel gears
- axle ratio 1: 2,66
- 5 mm transmission / input shaft
- Aluminum rim driver 12 mm hexagon
- Easy conversion to the axle with and without drive (both shafts and housing covers are included in the axle kit)
- Dimensions rear axle LxBxH: 44 x 135 x 33 mm
- Weight approx. 150 g
- Delivered as kit with pre-assembled differential
- Suitable for TAMIYA suspension and independent suspension
- Suitable for all TAMIYA and CARSON truck rims with 12 mm hexagonal driver
- Self-locking differential (shifter servo, linkages and Bowden cables are not required)
item code 907268
HELLA AUXILIARY HEAD LIGHT CHROM, ANGEL EYES WHITE
Hella auxiliary head light chrom, with Angel Eyes, for 7,2 and 12 Volt, with two operation`s for the light, side light shine`s white, traveling light shine`s white, fixing holder 5mm, included: 2 housings with holder (chrome), 2 blue and 2 clear glasses, 2 reflector`s, 2 boards, 1 diode, fixing screws, instruction
Licensed by Hella
Item code : 907574
HELLA AUXILIARY HEAD LIGHT BLACK, ANGEL EYES WHITE
Hella auxiliary head light black, with Angel Eyes, for 7,2 and 12 Volt, with two operation`s for the light, side light shine`s white, traveling light shine`s white, fixing holder 5mm, included: 2 housings with holder (black), 2 blue and 2 clear glasses, 2 reflector`s, 2 boards, 1 diode, fixing screws, instruction
Licensed by Hella
Item code : 907573
HELLA AUXILIARY HEAD LIGHT CHROM, ANGEL EYES BLUE
Hella auxiliary head light chrom, with Angel Eyes, for 7,2 and 12 Volt, with two operation`s for the light, side light shine`s blue, traveling light shine`s white, fixing holder 5mm, included: 2 housings with holder (chrome), 2 blue and 2 clear glasses, 2 reflector`s, 2 boards, 1 diode, fixing screws, instruction
Licensed by Hella
Item code : 907572
SCANIA TOP LIGHT HOLDER WITH CHROMED LIGHTS
Scania top light holder with chromed lights, scale 1/14, only for the Scania from Tamiya. The light holder is formed from brass and chrome, the lights are from plastic and chrome-plated, you can retrofit them with bulbs, 4 white and 4 blue glasses and the fixing srews are included, measure: width ca. 130mm , length ca. 30mm, Quantity: 1 pieces
Item code : 907064
Top light holder Volvo with chrom lights
Top light holder Volvo with chrom lights, scale 1/14, only for the Volvo from Tamiya, the holder buckled from brass and chrome,the lights are from plastic and chrome-plated, you can retrofit them with bulbs, 4 clear and 4 blue glasses and the fixing srews are included, measure: width ca. 120mm , length ca. 30mm, Quantity: 1 set
Item code : 907076
Top light – set for 5mm holder
Top light - set for 5mm holder, scale 1/14, from plastic chrome-plate, housing also chrome-plated, 2 clear and 2 blue glasses and fixing screws are included, the lamps can be lighted with bulbs, suitable to expand for the top light holder with item code: 907064, 907076, 907095 and 907134, Quantity: 2 pieces
Item code 907052
Reviews
There are no reviews yet.