Tank bracket set
18,99 €
incl. 19% VAT plus Shipping
Tank bracket set, suitable for the 3-axle Arocs (not suitable for the new tipper) and Actros from Tamiya, for attaching the tanks to the frame when the original battery compartment is removed. Contents: 2 aluminum brackets, mounting screws, instructions
item no: 907584
Warning! Not suitable for children under 14 years.
In stock
Description
Tank bracket set, suitable for the 3-axle Arocs (not suitable for the new tipper) and Actros from Tamiya, for attaching the tanks to the frame when the original battery compartment is removed. Contents: 2 aluminum brackets, mounting screws, instructions
Warning! Not suitable for children under 14 years.
Additional information
| Weight | 0,1 kg |
|---|---|
| Lieferzeit |
Product safety
Product safety
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
Related products
1/14 driven front axle with self-locking differential
1/14 driven front axle with self-locking differential
The CARSON drive concept for TAMIYA® Trucks in 1:14 scale. Equip your TAMIYA 2- or 3-axis TAMIYA tractor to the all-wheel all-wheel drive with our self-locking axles. The components can be easily replaced, as these are installed at the existing mounting points. A great advantage of these axles is that no further space is required for a shift servo (linkages and bowden cables), since this automatically locks automatically / automatically in case of a traction loss. Officially licensed by ZF Friedrichshafen AG.
The axle is equipped with a self-locking differential and can be built either with or without throughput, both shafts and housing covers are included. With a traction loss, the differential locks automatically / automatically and generates 100% traction. A major advantage of this drive axle is that NO shifter servos, Bowden cables and linkages are required for the differential locks, which also benefits the clarity and space offer in the chassis. The axle components are housed in a high-load-bearing reinforced plastic axle housing and are ideally suited for every construction site application.
• The front axle is modeled in detail
• Reinforced plastic axle housing
• CNC machined aluminum stub / steering lever
• High ground clearance thanks to a "slim" differential housing (height 33 mm)
• 16-way ball bearing
• Self-locking differential (shifter servo, linkages and Bowden cables are not required)
• Hardened steel bevel gears
• Axis ratio 1: 2.66
• Maximum steering angle 42 °
• 5 mm transmission / input shaft
• Aluminum rim driver 12 mm hexagonal
• Simple conversion to the axis with and without through-feed (both shafts and housing covers are included in the kit)
• Dimensions front axle LxBxH: 44 x 160 x 33 mm
• Weight approx. 175 g
• Matching aluminum rims (front driven) Art.-No. 907272 10-hole design narrow design and 907278 10-hole design wide design
12 (mm hex wrench)
• Incl. Tie rod
• The mounting kit (907280) is required to mount the front axle
item code 907267
Windshield wiper – set
Windshield wiper - set, scale 1/14, suitable for construction machines, buses, snowcats and so on, from plastic, included: a big doublearm-wiper and a small wiper, measure: small wiper: total length 42mm, wiper plade 31mm, arbor hole 2mm, big wiper: length from the wiper plade 60mm, from the arm 53mm, arbor hole 2mm, the set included 5 pices
Item code : 907369
Reviews
There are no reviews yet.