Servo bracket set steering axle GH
31,49 €
incl. 19% VAT plus Shipping
Servo holder set, suitable for the Carson Goldhofer art. no. 907060, steel holder, servo mount 40x20mm (standard servo), steering rod with ball heads for connecting the first steering axle, contents: 1 servo holder, 1 steering rod with ball heads M3, assembly material, instructions
Caution! Not suitable for children under 14 years of age.
item code: 907698
In stock
Description
Servo holder set, suitable for the Carson Goldhofer art. no. 907060, steel holder, servo mount 40x20mm (standard servo), steering rod with ball heads for connecting the first steering axle, contents: 1 servo holder, 1 steering rod with ball heads M3, assembly material, instructions
Caution! Not suitable for children under 14 years of age.
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
You may also like…
1/14 Steered low loader axle
Steered low loader axle, scale 1/14, suitable for Carson low loader models art. no. 907060 and art. no. 907700, also ideal for self-build models, very sturdy design, axle parts made of hardened steel, steering joints made of aluminum, steering heads with plain bearings, wheel studs Ø 5mm x 18mm length, track width approx. 185mm, maximum steering angle 45°, steering rod for connecting further steel axles with M3 ball joints, weight approx. 125g, total length: 162mm, height: 18mm, width: 31mm, contents: 1 low-loader axle, 1 steering rod, mounting material, instructions
Caution! Not suitable for children under 14 years.
item code: 907699
Related products
Trailer axle with lift kit + 8mm
Trailer axle with lift kit + 8mm, scale 1/14, the new generation of CARSON trailer axles with dummy air springs and lift kit. Bumps are cushioned even better by the new, softer rubber bellows and offer a driving pattern that is absolutely true to the original. The two suspensions included (standard & with raised height + 8mm) offer you the option of adapting your trailer to your higher (+ 8mm) tractor from the saddle level. Content: Trailer axle with lift kit, attachments, assembly instructions
Item No. 907643
Caution! Not suitable for children under 14 years of age.
Pivoted bogie with axle
Pivoted bogie with axle, scale 1/14, bogie for self-construction of trailer chassis, made of sheet steel, dimensions: length with drawbar 265mm, without 95mm, width with axle 165mm, without 100m, height 75mm, content: 1 set of steel parts for bogie, 1 plastic drawbar, 1 axle with dummy air springs, 1 pivot bearing with sliding washers, fastening material, instructions
Technical details:
- Bogie made of sheet steel in sandwich construction
- Bearing mounted bogie (adjustable) with sliding pad for easy maneuvering
- Drawbar (one-piece) made of fiber
-reinforced plastic with checkered plate application
- The drawbar is held by two tension springs for easier attachment
- Coupling height 75 mm- Trailer axle with dummy air suspensionDanger!
Attention! Not suitable for children under 14 years.
item code: 907625
Rear light board with housing Volvo FH16 tow truck
Rear light board with housing, scale 1/14, suitable for the Tamiya Volvo FH16 tow truck, from 7.2 to 12 volts, the following light functions: rear light with position light, left and right indicators, reversing light, fog light and brake light, metal rear light mask, cable length approx. 80cm, content: 1 right rear light, 1 left rear light, 2 metal rear light masks, tape, instructions
Attention! Not suitable for children under 14 years.
item code: 907632
Towing bar trailer
Towing bar trailer, scale 1/14, made of reinforced plastic, one-piece, for self-construction or as a spare part suitable for the trailer Art.No. 907622 and 907624, dimensions: length 180mm, width 90mm, height 6mm, content: 1 drawbar, 2 tension springs
Attention! Not suitable for children under 14 years.
item code: 907626
VOLVO FH16 REAR LIGHT
Volvo FH16 rear light, scale 1/14, suitable for the Volvo FH16 from Tamiya, from 7.2 to 12 volts, true-to-original light functions and look of the rear lights with the following functions: brake light, reversing light, fog light, parking light, indicator l + r, cable length approx 75cm, content: 1 set of housings with built-in circuit board
Warning: Not suitable for the MFC from Tamiya
Attention! Not suitable for children under 14 years.
item code: 907508
Volvo FH16 headlight insert with daytime running lights
Volvo FH16 headlight insert with daytime running lights, scale 1/14, suitable for Tamiya FH16, from 7.2 to 14 volts, reflector with circuit board and daytime running lights "V", light functions: daytime running lights (burns with 100% brightness), low beam (brightness of daytime running lights reduced automatically to 25%), turn signals l + r, fog lights, high beam, cornering lights, cover caps, cable length approx. 25 cm, fastening material, installation instructions, content: 1 set of reflector with circuit board l + r, 1 set of cover caps, fastening material
Warning: Not suitable for the MFC from Tamiya
Attention! Not suitable for children under 14 years.
item code: 907507
1/14 Tire insert 15mm
Tire insert 15mm, scale 1/14, suitable for the tires 907011, 907014 and for the original Tamiya tires in a narrow design, made of cellular rubber (medium strength), this keeps the truck tire in shape and gives additional stability. Depending on the load, the better walking behavior on road and off-road courses is noticeable through higher traction. Can be used for all TAMIYA tractors, semitrailers and trailers with narrow tires. Contents: 2 tire inserts 15mm
Attention! Not suitable for children under 14 years.
item code: 907516
1/14 driven front axle with self-locking differential
1/14 driven front axle with self-locking differential
The CARSON drive concept for TAMIYA® Trucks in 1:14 scale. Equip your TAMIYA 2- or 3-axis TAMIYA tractor to the all-wheel all-wheel drive with our self-locking axles. The components can be easily replaced, as these are installed at the existing mounting points. A great advantage of these axles is that no further space is required for a shift servo (linkages and bowden cables), since this automatically locks automatically / automatically in case of a traction loss. Officially licensed by ZF Friedrichshafen AG.
The axle is equipped with a self-locking differential and can be built either with or without throughput, both shafts and housing covers are included. With a traction loss, the differential locks automatically / automatically and generates 100% traction. A major advantage of this drive axle is that NO shifter servos, Bowden cables and linkages are required for the differential locks, which also benefits the clarity and space offer in the chassis. The axle components are housed in a high-load-bearing reinforced plastic axle housing and are ideally suited for every construction site application.
• The front axle is modeled in detail
• Reinforced plastic axle housing
• CNC machined aluminum stub / steering lever
• High ground clearance thanks to a "slim" differential housing (height 33 mm)
• 16-way ball bearing
• Self-locking differential (shifter servo, linkages and Bowden cables are not required)
• Hardened steel bevel gears
• Axis ratio 1: 2.66
• Maximum steering angle 42 °
• 5 mm transmission / input shaft
• Aluminum rim driver 12 mm hexagonal
• Simple conversion to the axis with and without through-feed (both shafts and housing covers are included in the kit)
• Dimensions front axle LxBxH: 44 x 160 x 33 mm
• Weight approx. 175 g
• Matching aluminum rims (front driven) Art.-No. 907272 10-hole design narrow design and 907278 10-hole design wide design
12 (mm hex wrench)
• Incl. Tie rod
• The mounting kit (907280) is required to mount the front axle
item code 907267
Reviews
There are no reviews yet.