Semitrailer with flat springs
59,99 €
incl. 19% VAT plus Shipping
Semitrailer axle with flat springs, scale 1/14, axle shaft from steel, diameter of the axle 6mm, axle bolt 5mm, total width ca. 168mm, length of the flat springs ca.87mm, distance from centre to centre from the flat springs ca.112mm, holding fixture for flat springs from plastic, suitable for a width of frame from 96mm, Package Contents: axle shaft, flat springs, holding fixture for flat springs and fixing parts
Item code : 907355
In stock
Description
Semitrailer axle with flat springs, scale 1/14, axle shaft from steel, diameter of the axle 6mm, axle bolt 5mm, total width ca. 168mm, length of the flat springs ca.87mm, distance from centre to centre from the flat springs ca.112mm, holding fixture for flat springs from plastic, suitable for a width of frame from 96mm, Package Contents: axle shaft, flat springs, holding fixture for flat springs and fixing parts
Additional information
| Weight | 1 kg |
|---|---|
| Lieferzeit |
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
You may also like…
Related products
Servo bracket set steering axle GH
Servo holder set, suitable for the Carson Goldhofer art. no. 907060, steel holder, servo mount 40x20mm (standard servo), steering rod with ball heads for connecting the first steering axle, contents: 1 servo holder, 1 steering rod with ball heads M3, assembly material, instructions
Caution! Not suitable for children under 14 years of age.
item code: 907698
Plast. Parts Trailersus. w/8mm lift
Plast. Parts Trailersus. w/8mm lift, scale 1/14, made of plastic, for converting the existing air suspension axle, suitable for all Carson trailers up to 09/21 (except for all low-loaders), optionally with 8mm lift, the new plastic parts and the air bellows allow a higher spring travel and a larger twisting of the axle, one set is required for each trailer axle, the metal parts and the assembly material are taken over from the existing axle, Content: 1 set of standard swing arms, 1 set of swing arms with + 8mm lift, 1 set of brackets, 2 air bellows
item code: 907644
Caution! Not suitable for children under 14 years of age.
Trailer axle with lift kit + 8mm
Trailer axle with lift kit + 8mm, scale 1/14, the new generation of CARSON trailer axles with dummy air springs and lift kit. Bumps are cushioned even better by the new, softer rubber bellows and offer a driving pattern that is absolutely true to the original. The two suspensions included (standard & with raised height + 8mm) offer you the option of adapting your trailer to your higher (+ 8mm) tractor from the saddle level. Content: Trailer axle with lift kit, attachments, assembly instructions
Item No. 907643
Caution! Not suitable for children under 14 years of age.
1/14 driven front axle with self-locking differential
1/14 driven front axle with self-locking differential
The CARSON drive concept for TAMIYA® Trucks in 1:14 scale. Equip your TAMIYA 2- or 3-axis TAMIYA tractor to the all-wheel all-wheel drive with our self-locking axles. The components can be easily replaced, as these are installed at the existing mounting points. A great advantage of these axles is that no further space is required for a shift servo (linkages and bowden cables), since this automatically locks automatically / automatically in case of a traction loss. Officially licensed by ZF Friedrichshafen AG.
The axle is equipped with a self-locking differential and can be built either with or without throughput, both shafts and housing covers are included. With a traction loss, the differential locks automatically / automatically and generates 100% traction. A major advantage of this drive axle is that NO shifter servos, Bowden cables and linkages are required for the differential locks, which also benefits the clarity and space offer in the chassis. The axle components are housed in a high-load-bearing reinforced plastic axle housing and are ideally suited for every construction site application.
• The front axle is modeled in detail
• Reinforced plastic axle housing
• CNC machined aluminum stub / steering lever
• High ground clearance thanks to a "slim" differential housing (height 33 mm)
• 16-way ball bearing
• Self-locking differential (shifter servo, linkages and Bowden cables are not required)
• Hardened steel bevel gears
• Axis ratio 1: 2.66
• Maximum steering angle 42 °
• 5 mm transmission / input shaft
• Aluminum rim driver 12 mm hexagonal
• Simple conversion to the axis with and without through-feed (both shafts and housing covers are included in the kit)
• Dimensions front axle LxBxH: 44 x 160 x 33 mm
• Weight approx. 175 g
• Matching aluminum rims (front driven) Art.-No. 907272 10-hole design narrow design and 907278 10-hole design wide design
12 (mm hex wrench)
• Incl. Tie rod
• The mounting kit (907280) is required to mount the front axle
item code 907267
Flat bed axle with bellow dummys
Flat bed axle with bellow dummys, scale 1/14, kit from boosted fiber glass-plastik,axle shaft from metal, track width with tires 190mm, to need a width of frame from 76mm, diameter of the wheel axle 5mm, shipment from the kit include are 1 axle with fixing parts and construction manual
Item code : 907140
Wheel bolt remodeling-set
Wheel bolt remodeling-set, for the front axle from all Tamiya - truck´s, if you change the wheel bolts and the ball heads you can reduce the clearenc ofthe wheel to a minimumt, so the steering works better, this shipment included: 2 wheel boltsfrom steel, 2 ball headsfrom steel, 2 shim rings and 2 lock washers and construction manual, Quantity: 1 set
Item code : 907091
Flat bed axle with flat springs
Flat bed axle with flat spings, scale 1/14, axle shaft from steel, diameter of the axle 6mm, axle bolt 5mm, total width ca. 176mm, length of the flat springs ca.70mm, distance from middle to middle from the flat springs ca.120mm, holding fixture for flat springs from plastic, Package Contents: axle shaft, flat springs, holding fixture for flat springs and fixing parts
Item code : 907354
Reviews
There are no reviews yet.