Gearmotor e-Support
37,49 €
incl. 19% VAT plus Shipping
Gearmotor e-Support, suitable for supporting set item code 907018, Rated voltage 7.4 VDC, idle speed 130 U / min, ratio 1: 100, continuous current 0.8 A, Contents: 1 Engine
item code : 907199
In stock
Description
Gearmotor e-Support, suitable for supporting set item code 907018, Rated voltage 7.4 VDC, idle speed 130 U / min, ratio 1: 100, continuous current 0.8 A, Contents: 1 Engine
Additional information
| Weight | 1 kg |
|---|---|
| Lieferzeit |
Product safety
Product safety
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
You may also like…
electrical support legs set
electrical support legs set, 1:14 scale, housing made of aluminum, steel punch with clamping screw, aluminum base, fixing screws. Dim. : Housing 15x15x73mm with 2 mounting holes M3, stamp 8 diameter x 62mm, retracted foot 19 dia x 3.5mm, total length: 76.5, extended 114mm, Contents: 2 Housing, 2 punch, 2 feet, 2 clamp screws and four mounting screws M3x6
item code : 907218
Related products
Drive set for the Büssing 8000 S 13
Drive set for the Büssing 8000 S 13, consisting of a 7.2 volt underfloor motor with planetary gearbox from the company Servonaut, the motor is pre-disturbed , has an idle speed of 470 rpm, the rated speed is 390 rpm, rated torque: 34.6 Ncm, the matching motor holder made of aluminum and the cardan shaft made of stainless steel with appropriate length compensation, mounting hardware and installation instructions. Contents: 1 gear motor, 1 motor holder, 1 cardan shaft, installation instructions
Caution. Not suitable for children under 14 years.
item code: 251001
Volvo FH16 Alum. fuel tank mount
Volvo FH16 Alum. fuel tank mount, scale 1/14, suitable for the Tamiya Volvo FH16, made of aluminum, is required for the removal of the original battery compartment, contents: 1x left and 1x right aluminum holder, mounting screws, instructions
item code: 907491
Attention! Not suitable for children under 14 years.
Alum. mount (2) Tipper Fitting
Alum. mount (2) Tipper Fitting, Scale 1/14, suitable for the Tamiya Arocs tipper, if the original battery compartment is removed, these holders are needed to attach the tank and exhaust. Content: 2 brackets (1x left and 1x right side), mounting screws, instructions
item code: 907615
Warning! Not suitable for children under 14 years
Reviews
There are no reviews yet.