Front axle rim chromed
26,49 €
incl. 19% VAT plus Shipping
Front axle rim chromed, scale 1/14, plastic, with seat for ball bearing diameter 49mm, width 27,5mm, suitable for wide base tyre with item code: 907012 and for all Tamiya truck´s (tyres shown are not included with the rim), Quantity: 2 pieces
Item code 907061
In stock
Description
Front axle rim chromed, scale 1/14, plastic, with seat for ball bearing diameter 49mm, width 27,5mm, suitable for wide base tyre with item code: 907012 and for all Tamiya truck´s (tyres shown are not included with the rim), Quantity: 2 pieces
Additional information
| Weight | 1 kg |
|---|---|
| Lieferzeit |
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
You may also like…
Wheel bolt remodeling-set
incl. 19% VAT
plus Shipping
Wheel bolt remodeling-set, for the front axle from all Tamiya - truck´s, if you change the wheel bolts and the ball heads you can reduce the clearenc ofthe wheel to a minimumt, so the steering works better, this shipment included: 2 wheel boltsfrom steel, 2 ball headsfrom steel, 2 shim rings and 2 lock washers and construction manual, Quantity: 1 set
Item code : 907091
Related products
1/14 Tire insert 15mm
incl. 19% VAT
plus Shipping
Tire insert 15mm, scale 1/14, suitable for the tires 907011, 907014 and for the original Tamiya tires in a narrow design, made of cellular rubber (medium strength), this keeps the truck tire in shape and gives additional stability. Depending on the load, the better walking behavior on road and off-road courses is noticeable through higher traction. Can be used for all TAMIYA tractors, semitrailers and trailers with narrow tires. Contents: 2 tire inserts 15mm
Attention! Not suitable for children under 14 years.
item code: 907516
1/14 Aluminum rim small long hole AG front axle
incl. 19% VAT
plus Shipping
Aluminum rim small AG front axle, scale 1/14
• Small version
• Aluminum rims in 10-slot Euro Design
• Suitable to all wide tires in Tamiya scale
• Carrier 12 mm hexagon
• DimensionsØxB: 49 x 21 mm
• Weight approx. 57 g / piece
• Incl. 20 ornamental screws and 2 hub caps
• Delivery 2 pieces
item code: 907411
Warning! Not suitable for children under 14 years.
Four-wheel transfer case 2:1 with self-locking differential
incl. 19% VAT
plus Shipping
Four -wheel transfer case with self-locking differential, for the scale 1:16 to 1:10, reduction ratio 2:1, permanent four-wheel drive, self-locking differential to compensate for differences in the drivetrain, housing made of aluminum, 8 ball bearings, input and output shafts 5mm, hardened gears, with mounting bracket (62mm wide), suitable for frame widths of 60-63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages
item code: 251205
Warning! Not suitable for children under 14 years.
Semitrailer rim gray, with hexagon socket
incl. 19% VAT
plus Shipping
Semitrailer rim gray, scale 1/14, gray plastic, cover cap black, with hexagon socket, diameter 49mm, width 27,5mm, suitable for the wide base tyre with item code: 907012 , with this part it is posible to change from twin tyres to single tyres at all Tamiya trailers (tyres are not included at this shipment), Quantity: 2 pieces
Item code 907026
Semitrailer rim chromed with hexagon socket
incl. 19% VAT
plus Shipping
Semitrailer rim chromed, scale 1/14, plastic, cover cap black, with hexagon socket, diameter 49mm, width 27,5mm, suitable for the wide base tyre with item code: 907012 , with this part it is posible to change fromtwin tyres to single tyres at all Tamiya trailers, Quantity: 2 rims, 2 cap (tyres are not included at this shipment)
Item code : 907053
3-speed gearbox with transfer case
incl. 19% VAT
plus Shipping
3-speed gearbox with transfer case, for all-wheel drive, gearbox housing made of aluminum, hardened steel gears, 8-way ball bearings, suitable for the scale 1/16 to 1/10, reductions: 1st gear 22,65: 1, 2nd gear 11.32: 1, 3rd gear 5.66: 1. Dim. without motor 80mm, width 46.6mm, height 64mm, The output shafts have a diameter of 5mm.
The front axle can be switched on with a servo. The gears are switched by a second servo. The gearbox is mounted, the max. input speed is 6,500 rpm. The attachment to the frame via the existing brackets on the transmission housing. The frame width should be between 60-63mm.
Contents: 1 manual gearbox with distributor, fixing screws, linkages
Item code: 251105
Reviews
There are no reviews yet.