2-axle dolly rigid for Gigaliners
325,00 €
incl. 19% VAT plus Shipping
2-axle dolly rigid for Gigaliners, in Tamiya scale, with fifth wheel for mounting Tamiya and Carson semi-trailers.
– steel frame (laser cut and welded)
– 7 chamber taillights
– 8-way ball-bearing wheels
– Air spring dummies
– Saddle plate made of plastic
– Tiller made of aluminum, adjustable in length and height
Technical specifications:
Length: 365mm
Width: approx. 195mm
Height: about 85mm
item code : 907210
Warning! Not suitable for children under 14 years.
In stock
Description
2-axle dolly rigid for Gigaliners, in Tamiya scale, with fifth wheel for mounting Tamiya and Carson semi-trailers.
– steel frame (laser cut and welded)
– 7 chamber taillights
– 8-way ball-bearing wheels
– Air spring dummies
– Saddle plate made of plastic
– Tiller made of aluminum, adjustable in length and height
Technical specifications:
Length: 365mm
Width: approx. 195mm
Height: about 85mm
Warning! Not suitable for children under 14 years.
Additional information
| Weight | 2 kg |
|---|---|
| Lieferzeit |
Product safety
Product safety
Reviews (0)
You must be logged in to post a review.
Shipping & Delivery
You may also like…
Trailer hitch with drawbar
Trailer hitch with drawbar, scale 1:14, housing and drawbar made of plastic boosted with fibre glass, mechanics made of steel, it works by hand or with a servo, measure: width 30mm, height 30mm, depth 36mm, fixing plate: width 22mm, height 12mm, depth 7mm, includet: 1 couplingl, 1 drawbarl, fixing screws, instruction
Item code: 907182
Related products
3-axle box trailer Ver.III white
3-axle box trailer Ver.III white, scale 1/14, torsion-resistant steel frame (3 and 1 mm steel, lasercut) screwed together in sandwich construction, underride guard and spare wheel holder made of steel, wide chrome rims with ball bearings and wide tyres, new axle suspension optionally with height adjustment +8 mm (included), aluminium trailer supports adjustable (manual), aluminium bumper incl. 7-chamber rear lights, semi-circular mudguards, aluminium box body with plastic side panels in sandwich look (screwed together), aluminium door hinges (270° opening angle), loading door locking with magnets, the kit is supplied unpainted, assembly instructions, decal sheet
Dimensions: length approx. 980 mm, width approx. 195 mm, height approx. 300 mm, weight 7,400 g
item code: 907792
Caution! Not suitable for children under 14 years.
3-axle trailer
3-axle trailer in scale 1/16
suitable for the Büssing 8000 S13 ( item no. 251000 )
The original from 1950 had a permissible total weight of 24 tons and was equipped with twin tyres.
The trailer is supplied as a kit, unpainted. The frame and the body are made of milled polystyrene plates. The flatbed has injection-moulded plastic drop sides and is covered with a real wooden floor. The steel axles with Trilex double rims are suspended in the frame with leaf springs. The drawbar is made of reinforced plastic and is held at coupling height by a tension spring. The towing hitch for the motor car is included in the kit. The 1-chamber tail lights with bracket and number plate holder complete the picture.
Optionally a lighting set is available for the 3-axle trailer art.no. 251006 (not included in the kit).
Technical details:
Total length approx. 635mm, length flatbed approx. 520mm, width approx. 160mm, total height approx. 125mm, weight approx. 1,350g.
Scope of delivery:
- Milling plates made of polystyrene for frame, bogie and flatbed.
- Platform gates made of injection moulded parts
- Steel axles with leaf spring suspension
- Trilex - double rims with Fulda Coloss tyres
- Bracket with spare tyres
- Platform with real wood floor
- Rear lights with number plate holder
- Towing eye and drawbar made of reinforced plastic
- Decal sheet and detailed building instructions
Attention! Not suitable for children under 14 years.
item code: 251005
2-axle trailer
2-axle trailer in scale 1/16
suitable for the Büssing 8000 S13 ( item no. 251000 )
( the expected delivery date is in November )
The original from 1946 had a permissible total weight of 12 tons and had twin tires. Until the beginning of the 50's it was even allowed to couple two of these over 7m long trailers. A real challenge as a captain of the road.
The trailer is supplied as a kit, unpainted. The frame and the body are made of milled polystyrene plates. The flatbed has injection-molded plastic drop sides and is covered with a real wood floor. The steel axles with Trilex double rims are suspended in the frame with leaf springs. The drawbar is made of reinforced plastic and is held at hitch height by a tension spring. The towing hitch for the motor car is included in the kit. The 1-chamber tail lights with bracket and license plate holder complete the picture.
A lighting set is optionally available for the 2-axle trailer (item no. 251004).
Technical details:
Total length approx. 460mm, length flatbed approx. 345mm, width approx. 160mm, total height approx. 125mm, weight approx. 950g.
Scope of delivery:
- Milling plates made of polystyrene for frame, bogie and flatbed
- Drop sides made of injection molded parts
- Steel axles with leaf spring suspension
- Trilex - double rims with Fulda Coloss tires
- Bracket with spare tire
- Platform with real wooden floor
- Tail lights with license plate holder
- Towing eye and drawbar made of reinforced plastic
- Decal sheet and detailed building instructions
Caution. Not suitable for children under 14 years.
item code: 251003
Büssing 8000 S 13
Büssing 8000 S 13 as a new edition in scale 1:16
In addition to many different trucks, the Büssing 8000 S 13 was one of the most famous and also most impressive trucks of its time in the 1950s. A typical feature for this truck era were the long engine hoods, far too little horsepower and the harsh sound of the four-stroke diesel engines. The 6-cylinder engine produced only 180 hp, with the "S" standing for standing engine and the "13" for the total displacement of 13 liters.
More than 20 years ago we produced this model and distributed it through the company Conrad Electronic. After a few years we were forced to discontinue the model. So the Büssing disappeared from the market again, but the demand for the model was unbroken. Therefore we decided to resurrect it in our anniversary year. New injection molds were made for the body and add-on parts. The platform was reinforced and got a real wood floor. The interior was revised and completed with pedals, gear stick and hand brake lever.
Optionally, the headlights can be retrofitted with a lighting kit (item no. 251002). The drive set (item no. 251001) includes an underfloor motor from Servonaut, which transmits power to the rear axle via a stainless steel cardan shaft with length compensation. This gives the model enough power and the appropriate sensitivity for maneuvering with the matching 2-axle trailer (item no. 251003). This can also be optionally retrofitted with a lighting set (item no. 251004). Until the beginning of the 50's it was even allowed to couple two of these trailers. A real challenge as a captain of the road.
Technical details:
Length approx. 570mm, width approx. 160mm, height approx. 165mm, weight approx. 1,600g.
The kit is supplied unpainted.
Scope of delivery:
- Frame made of aluminum with all drill - and threaded holes
- Ball bearing rear axle made of reinforced plastic with metal differential
- Front axle made of reinforced plastic
- Ball bearing Trilex - rims in front, in the rear Trilex - double rims
- original Fulda Coloss tires plus spare tires
- Leaf spring set front and rear made of spring steel
- driver's cab consists of several plastic parts (ABS)
- flatbed made of polystyrene with drop sides made of injection molded parts and real wooden floor
- Interior, tank, air tank, splash flaps, hardware parts, exhaust etc.
- Decal sheet and detailed building instructions
Caution. Not suitable for children under 14 years.
item code: 251000
2-axle stanchion-trailer Riedler
2-axle stake trailer Riedler
The 2-axle stanchion trailer from "Riedler Fahrzeugbau" reflects its attractive workmanship and appearance as in the original as well as in the model and makes the trailer an unmistakable companion on real roads, as well as in the model on the course.
In conjunction with the TAMIYA Volvo FH16 timber transporter, this articulated train becomes a workhorse and is in no way inferior to the original. The massive frame made of sheet steel in connection with the aluminum stake allow a payload of approx. 5,500g. So that the different lengths of wood also lie optimally on the stanchions, they can be moved and freely positioned on the chassis frame.
To refine the 2-axle stake trailer, an optional set (item no .: 907623, with spare wheel and holder, 2 compressed air tanks and a lashing set) is available.
For use on the TAMIYA Volvo FH16 tractor, the towing hitch with item no .: 907182 is required, the assembly is carried out on the existing frame end crossmember.
Product details:
- 1:14 scale
- Torsionally stiff steel frame in sandwich construction
- Frame made of 3 and 1 mm steel sheet laser cut
and CNC bent
- Turntable made of sheet steel in sandwich construction
- Stored turntable (adjustable) with sliding pad
for easy maneuvering
- Drawbar (one-piece) made of fiber-reinforced plastic with
Checker plate application
- For easier attachment, the drawbar is attached to two
Tension springs held in the coupling height of 75 mm
- Posts (one piece) milled from solid aluminum material
- Post bracket can be loosened using two grub screws
be repositioned or removed as needed
become.
- Trailer axles with dummy air springs
- Ball-bearing chrome rims with wide tires
- Solid aluminum underride protection (left / right)
- Mudguard splash guard and bumper grille set
- CNC milled aluminum rear bumper
- 7-chamber taillights, license plate holder and
Work lights included
- Decor set
Dim .: LxWxH: 620 x 190 x 305 mm
Weight: 2,600g
- Optional Available: 907623 Accessory set for 2-axle Riedler stanchions
* Official Licensed by Ernst Riedler Fahrzeugbau- und Vertriebs.m.b.H
Attention! Not suitable for children under 14 years.
item code: 907622
3-Axle Heavy Low Loader
3-Axle Heavy Low Loader
A successful addition to the various TAMIYA tractors. The ramp can be folded down by hand to drive on.
The kit impresses with the following features:
CNC machined aluminum frame plus king pin
• Height adjustable trailer supports
• 3 axles with twin tires suspended from leaf springs
• ball bearing
• 4-chamber rear lights can be electrically retrofitted.
Suitable for all TAMIYA tractors.
The ramp can be folded down by hand to drive on.
The trailer is equipped with three axles with twin tires. The chassis is suspended with leaf springs. The CNC machined frame is made of aluminum. All supports are mechanically adjustable. The 4-chamber taillights can be electrically retrofitted.
Length: ca. 990 mm, Width:ca. 190 mm, Height: ca. 135mm, Weight:ca .4,5 kg
Attention! Not suitable for children under 14 years.
item code: 907000
3-axle Fliegl Megarunner
3-axle Fliegl Megarunner, in the Tamiya scale, kit, new aluminum door hinges with 270 ° opening angle, new door locks
The kit contains no painted parts
- Air spring dummies on all 3 axes
- steel frame, (laser cut)
- Tarpaulin red with Fliegl logo
- 6 semi-trailer rims, wide, chrome + 6 wide tires
- Wheels are 12 ball bearings
- 7-chamber taillights (without bulbs)
- Underride protection made of steel
- license plate (illuminated)
- Plastic mudguards with brackets
- Semi-trailer bumper with lasered Fliegl logo
- Semi-trailer props, mechanically height adjustable
- Spare wheel holder one-armed
- Detailed construction manual
Dimensions: 995x195x270mm Weight 6.000 gr. Max.load 10kg.
item code : 907235
Warning! Not suitable for children under 14 years.
Reviews
There are no reviews yet.