Volvo FH 16 Propeller shaft set 6×6
Universal tie-down-set lowloader
Universal tie-down-set lowloader, scale 1/14, consisting of 25cm steel chain with 2 hooks made of aluminum, 5x lugs made of steel with M3 thread, suitable for the Goldhofer TU4 item code: 907400 and every other low loader, content: 1x chain, 2x hooks, 5x lugs, 7x stainless steel rings, instructions
item code: 907450
Attention! Not suitable for children under 14 years.
Alum. stow case for wood plank
Alum. stow case for wood plank, storage compartment with wooden boards, scale 1/14, for transporting excess vehicle widths, only suitable for the Goldhofer TU4 item code: 907400, storage compartment made of aluminum, 12x wooden boards to lay on, contents: 1x storage compartment, 12x wooden boards, mounting hardware, instructions.
item code: 907449
Attention! Not suitable for children under 14 years.
Lifting suspension kit + 8mm 2-axle truck
Lifting suspension kit + 8mm 2-axle truck, 1/14 scale, suitable for all Tamiya 2-axle trucks, made of aluminum, with shock absorber extensions, the vehicle is optically higher, a greater ground clearance and better off-road capability of the model is not achieved, Content: 2 bucks at the back, 2 fastenings at the front + 4 brackets, 4 shock absorbers extensions, fixing material, instructions
item code: 907452
Attention! Not suitable for children under 14 years.
Volvo FH16 servo mount 2-speed gearbox
Volvo FH16 Alum. fuel tank mount
Volvo FH16 Alum. fuel tank mount, scale 1/14, suitable for the Tamiya Volvo FH16, made of aluminum, is required for the removal of the original battery compartment, contents: 1x left and 1x right aluminum holder, mounting screws, instructions
item code: 907491
Attention! Not suitable for children under 14 years.
Alu warning sign
Alu warning sign, scale 1/14, with decals, suitable for the Goldhofer STN-L3 907060 and Goldhofer TU4 Art.No. 907400 or for any other low loader, consisting of a right and left aluminum holder with decals, content: 1x left and 1x right aluminum holder, decals, mounting screws, instructions
item code: 907448
Attention! Not suitable for children under 14 years.
Alum. cylinder mount
Alum. cylinder mount, scale 1/14, suitable for the Goldhofer STN-L3 item code: 907060 and Goldhofer TU4 item code: 907400, is simply replaced by the plastic part, content: 2x cylinder holder, 2x rail, mounting screws, installation instructions
item code: 907476
Attention! Not suitable for children under 14 years.
Alu ramp hinge
Volvo FH16 front winker
Volvo FH16 front winker, 1/14 scale, from 6.6 to 15 volts, suitable for the Volvo FH16 from Tamiya, as in the original the indicator lights backwards, consisting of a plastic housing with built-SMD, is installed in the existing luminaire housing, cable length approx. 25cm, Contents: 1 left and 1 right case, installation instructions
Attention: Not suitable for the MFC of Tamiya
item code: 907506
Attention! Not suitable for children under 14 years.
Volvo FH16 position lights set
Volvo FH16 position lights set, scale 1/14, from 6.6 to 15 volts, suitable for the Volvo FH16 from Tamiya, consisting of 6 pieces of orange 3mm LED's for the side position light, kabellength about 65cm, 2 lighting boards for installation in the roof , with parking light / high beam + with 2 each white 3mm LED's for the headlights - roof lamp bracket, colored stranded cable with a length of about 45cm, content: 1 left and 1 right lighting board, 6x orange LEDs, installation instructions
Attention: Not suitable for the MFC of Tamiya
item code: 907494
Attention! Not suitable for children under 14 years.
Volvo FH16 LED-PCB taillight
Volvo FH16 LED-PCB taillight, 1/14 scale, from 6.6 to 15 volts, fits the Volvo FH16 from Tamiya, with metal tail light mask (for a true to the original look) 5 light functions: turn signal right / left, kombie effect brake light / tail light , Reversing spotlight and fog light, colored stranded cable with a length of approx. 80cm, contents: 1 left and 1 right lighting board, 2x rear light mask, mounting material, installation instructions
Attention: Not suitable for the MFC of Tamiya