6 – chamber LED board 12 Volt

31,80 
6 - chamber LED board 12 Volt, 1 pair (1x left,1x right) populated with SMD-LEDs, common positive polel, 5 performance for the light, length of the cable ca. 20cm, suitable for item code: 207039, ( the tail lamps are not included ) Item code : 191530 Not compatible with the MFC from Tamiya

6 – chamber LED board 7,2 Volt

31,80 
6 - chamber LED board 7,2 Volt, 1 pair (1x left,1x right) populated with SMD-LEDs, common positive polel, 5 performance for the light, length of the cable ca. 20cm, suitable for item code: 207039, ( the tail lamps are not included ) Item code 191525 Not compatible with the MFC from Tamiya

Bucket teeth

19,49 
Bucket teeth (spare part track loader), scale 1:14, from fiber plastic, total length ca. 40mm, width ca. 10mm, height ca. 10mm, height from the trench 2mm, two fixing holes, included: 2 bucket teeth, 4 srews M2x8 und 4 srew nuts M2 Item code : 907145

Transfer case 4WD 2:1

107,80 
Transfer case 4WD, for the scale 1:16 to 1:10, housing made of aluminum, ball bearing 6 times, reduction ratio 2:1, input and output shafts 5mm, hardened gears, front axle connectable, with mounting bracket (62mm wide), suitable for frame widths of 60 -63mm, dim. LxWxH: 54x30x57mm, Contents: 1 transfer case, fixing screws, linkages Item code 251195

Goldhofer Heavy-Loader BAU STN-L3

585,00 
Goldhofer Heavy-Loader “BAU STN-L3” (with plateau) Carry it all piggyback … Fits all Tamiya trucks. These equipment highlights make the set stand out: the divided ramp can be manually folded down for driving operation. item code: 907060

Euro-Bumper semitrailer 3-chamber tail lamps

24,99 
Euro - Bumper semitrailer, scale 1/14, from aluminum, suitable for a frame with a width from 96mm, suitable also for 3 - chamber - tail lamps with item code : 907039, Fog - and Backup light set item code : 907077 and the number plate holder with item code: 907034, included: 1 piece Item code : 907371

Flat bed axle with bellow dummys

76,99 
Flat bed axle with bellow dummys, scale 1/14, kit from boosted fiber glass-plastik,axle shaft from metal, track width with tires 190mm, to need a width of frame from 76mm, diameter of the wheel axle 5mm, shipment from the kit include are 1 axle with fixing parts and construction manual Item code : 907140

Widenings low loader

21,49 
Widenings low loader, scale 1/14, plastic, with steel pin for fixing, dim.: 19,5mm, height 12,5mm, thickness 4mm, pins 2x16mm, content : 10 widenings and 10 pins Caution! Not suitable for children under the age of 14. item code: 907372

Bellow 26mm, soft

7,49 
Bellow 26mm, scale 1/14, soft, gunning from rubber, suitable for light models to 10 kg, measure: diameter 26mm, height 21mm, Quantity: 2 pieces Item code : 907373

Flat Bed tires 1/14, Fulda Ecotonn

26,49 
Flat bed tires 1/14, Fulda Ecotonn, solid rubber tires, Ø 59mm, width 16mm, inner Ø 29mm, suitable for low loader rims ItemNo. 220614, item no. 220616 and item no. 207093, content: 4 tires Item code 907583

Windshield wiper – set

7,99 
Windshield wiper - set, scale 1/14, suitable for construction machines, buses, snowcats and so on, from plastic, included: a big doublearm-wiper and a small wiper, measure: small wiper: total length 42mm, wiper plade 31mm, arbor hole 2mm, big wiper: length from the wiper plade 60mm, from the arm 53mm, arbor hole 2mm, the set included 5 pices Item code : 907369

Drive system tyre Fulda Ecocontrol

26,49 
Drive system tyre Fulda Ecocontrol, scale 1/14, diameter outside 82 mm, diameter inside 44 mm, width 21 mm, tube-chamber tire, with inscription, suitable for all Tamiya truck´s, Quantity: 2 pieces Item code : 907014