Fulda Variotonn off-road wide tyres 1/8
Trailer axle for classic trucks
Trailer axle for classic trucks, scale 1/16, axle made of 8mm steel, leaf spring mount made of plastic, suitable for the leaf spring set art.no. 2124, distance between leaf springs approx. 50mm ( from centre to centre ), track width approx. 150mm with double tyres ( trilex rims art.no. 220995 ), contents: 1 axle shaft, 1 set of leaf spring mounts, fixing material
Attention! Not suitable for children under 14 years.
item code: 220992
Drive set for the Büssing 8000 S 13
Drive set for the Büssing 8000 S 13, consisting of a 7.2 volt underfloor motor with planetary gearbox from the company Servonaut, the motor is pre-disturbed , has an idle speed of 470 rpm, the rated speed is 390 rpm, rated torque: 34.6 Ncm, the matching motor holder made of aluminum and the cardan shaft made of stainless steel with appropriate length compensation, mounting hardware and installation instructions. Contents: 1 gear motor, 1 motor holder, 1 cardan shaft, installation instructions
Caution. Not suitable for children under 14 years.
item code: 251001
Rear axle for classic trucks
Rear axle for classic trucks, scale 1/16, reduction 3:1, bevel gears and spur differential made of hardened steel, 6 ball bearings, reinforced axle housing made of plastic, input and output shafts 5mm Ø, track width 150mm (with our Trilex - double rims item no. 220995), mounting width of the leaf springs 58mm, suitable for a frame width of 50mm, kit with detailed assembly instructions.
Attention! Not suitable for children under 14 years.
item code: 220993
Road tire Fulda Coloss
Aluminum stanchion
Aluminum stanchion, scale 1/14, made of aluminum and steel, for retrofitting and expanding, suitable for the 3-axle stanchion trailer III item code: 907629 and for the 2-axle stake trailer Riedler item code: 907622, stanchion holder can be loosened using two grub screws and repositioned or removed as required, detailed assembly instructions and fastening material, content: 1 stanchion
item code: 907652
Caution! Not suitable for children under the age of 14.
Conversion kit building material trailer
Conversion kit building material trailer, scale 1/14, suitable for flatbed trailer III item code: 907650
Technical details:
- CNC milled aluminum side walls with detailed surface engravings
- Hinge made of 1mm sheet steel
- The side walls are locked by neodymium magnets
- All 9 side walls are functional 4 hinges per board wall
- Center posts can be removed for better loading
- detailed assembly instructions + decal sheet
Weight: approx. 2,500g
Item code: 907649
Caution! Not suitable for children under the age of 14.
Flatbed trailer III made of steel
Flatbed trailer III, scale 1/14 Technical details:
- Torsion-resistant steel frame in sandwich construction
- Frame made of 3 and 1 mm sheet steel, laser cut and CNC bent
- Solid aluminum front wall
- Detailed trailer axles with dummy air springs, optionally with a +8mm lift
- Solid steel underride protection (left/right)
- Steel spare wheel holder with spare wheel
- Chrome rims with ball bearings and wide road tires
- 7-chamber taillights and license plate
- holder included 16 lashing eyes
- Real wood floor application
- 8mm aluminum bumper
- detailed assembly instructions + decal sheet
Dimensions: LxWxH: 981 x 195 x 210mm, weight: 4,400g
Item No. 907650
Caution! Not suitable for children under the age of 14.
Pallet box made of steel
Pallet box made of steel, scale 1/14, compatible with the new 3-axle flatbed trailer III item code: 907650 and item code: 907629 Stanchion trailer III
Technical details:
- Sheet steel laser cut and CNC bent
- authentic opening mechanism
- Space for 24 pallets
- The flap is locked by neodymium magnets
- 6 Euro pallets made of plastic
- detailed assembly instructions and fastening material
Dimensions: LxWxH: 215 x 185 x 45mm, weight: 1,200g
item code: 907651
Caution! Not suitable for children under the age of 14.
Drive shaft set (5) 8×8 MB Arocs rear tipper with compensation
Drive shaft set (5) 8x8 MB Arocs rear tipper with compensation, scale 1/14
This drive shaft set is required to convert the MB Arocs rear tipper to all-wheel drive.
(Application: From 2-speed compact transmission to 2-speed transfer case and on to front axle 1 and front axle 2, rear axle 1 and rear axle 2).
The length compensation of the drive shafts ensures, depending on the load, deflection and axle articulation, that the drive shafts are safely guided in the drivers.
Total length / (with length compensation):
- Shaft from 2-G gearbox to transfer case 155 mm
- Shaft from transfer case to rear axle 1 38 mm
- Shaft from transfer case to front axle 1 45 mm
- Shaft with length compensation from rear axle 1 to rear axle 2 38 mm (with compensation 38 - 43 mm)
- Shaft with length compensation from front axle 1 to front axle 2 67 mm (with compensation 67 - 72 mm)
- Material: hardened steel
Content: 5 drive shafts
item code: 907642
Caution! Not suitable for children under 14 years of age.
Drive shaft set (4) 6×6 Volvo FH16 timber truck with compensation
Drive shaft set (4) 6x6 Volvo FH16 timber truck with compensation, scale 1/14
This drive shaft set is required to convert the Volvo FH16 timber truck to four-wheel drive.
(Application: From the 2-speed compact transmission to the 2-speed transfer case and on to the front, rear axle 1 and rear axle 2).
The length compensation of the drive shafts ensures, depending on the load, deflection and axle articulation, that the drive shafts are safely guided in the drivers. Total length / (with length compensation):
- Shaft from 2-G gearbox to transfer case 45 mm
- Shaft with length compensation from transfer case to rear axle 1 57 mm (57 - 62 mm)
- Shaft with length compensation from rear axle 1 to rear axle 2 38 mm (with compensation 38 - 43 mm)
- Shaft with length compensation from transfer case to front axle 67 mm (with compensation 67 - 82 mm)
- Material: hardened steel
Content: 4 drive shafts
item code: 907639
Caution! Not suitable for children under 14 years of age.
Drive shaft set (4) 6×6 MB Arocs tipper with compensation
Drive shaft set (4) 6x6 MB Arocs tipper with compensation, scale 1/14
This drive shaft set is required when the 3-axle rear tipper is converted to four-wheel drive.
(Application: From the 2-speed compact transmission to the 2-speed transfer case and on to the front, rear axle 1 and rear axle 2).
The length compensation of the drive shafts ensures, depending on the load, deflection and axle articulation, that the drive shafts are safely guided in the drivers.
Total length / (with length compensation):
- Shaft from 2-G gearbox to transfer case 45 mm
- Shaft with length compensation from transfer case to rear axle 1 57 mm (57 - 62 mm)
- Shaft with length compensation from rear axle 1 to rear axle 2 38 mm (with compensation 38 - 43 mm)
- Shaft with length compensation from transfer case to front axle 67 mm (with compensation 67 - 82 mm)
- Material: hardened steel
Content: 4 drive shafts
item code: 907638
Caution! Not suitable for children under 14 years of age.